A Study on the Propagation of Chloride-Induced Stress Corrosion Cracking for Austenitic Stainless Steel at Corrosion Environment
Authors:
- Dong-Jin OhDODong-Jin Oh
- Gi-Dong KimGKGi-Dong Kim
- Yong-Joon KangYKYong-Joon Kang
- Sang-Woo SongSSSang-Woo Song
Open Access
- 30 June 2024
- journal article
- research article
- Published by The Korean Welding and Joining Society in Journal of Welding and Joining
- Vol. 42 (3) , 248-256
Abstract
Austenitic stainless steels have been widely used in the petrochemical industry, nuclear power plants and the ship industry due to their high toughness and corrosion resistance. However, these materials are susceptible to environmentally-assisted degradation, such as chloride-induced stress corrosion cracking (CISCC). In this respect, this study investigated CISCC crack propagation rate for austenitic stainless steels, such as type 304L and type 316L, in the corrosion environment. Considering the environment of the spent nuclear fuel canister used in the dry storage system, the test chamber is always maintained at 3.5% NaCl and related humidity (RH) 95% at 60℃. For initiation of CISCC, a test procedure, which has nine pre-cracking procedures for a CT specimen, is suggested. In a test procedure, crack transitioning, which induces the environmental corrosion crack, is observed after mechanical precracking. To determine the CISCC crack length corresponding to each test step, the direct current potential drop (DCPD) method is measured in real-time. In addition, the CISCC crack observed after final fracture is measured using optical microscopy in order to improve the accuracy of the measured crack length. In the test results, CISCC crack resistance of type 316L is better than that of type 304L. Finally, the test results show that the CISCC crack propagation rate is 2.784E-11 m/s for type 304L and is 9.93E-11 m/s for type 316L.Keywords
Funding Information
- Ministry of Science and ICT
- National Research Foundation of Korea (2019M2D2A2048296)
This publication has 10 references indexed in Scilit:
- Fabricated of the SCC Reference Specimen for Increasing of In-Service Inspection Accuracy in Nuclear Power PlantJournal of Welding and Joining, 2023
- The effect of martensite on stress corrosion crack initiation of austenitic stainless steels in high-temperature hydrogenated waterCorrosion Science, 2021
- Pitting Corrosion Characteristic Depending on Welding Pass and Heat Input of GTA Weldment on Superaustenitic Stainless Steel(UNS S32654)Journal of Welding and Joining, 2020
- Development of Chloride Induced Stress Corrosion Cracking Test Method for Austenitic Stainless Steel Using C(T) SpecimenTransactions of the Korean Society of Mechanical Engineers - A, 2019
- Summary of available data for estimating chloride-induced SCC crack growth rates for 304/316 stainless steel2016
- The initiation and propagation of chloride-induced transgranular stress-corrosion cracking (TGSCC) of 304L austenitic stainless steel under atmospheric conditionsCorrosion Science, 2014
- Prediction Model for Atmospheric Stress Corrosion Cracking of Stainless SteelECS Transactions, 2013
- Initiation and Propagation of Stress Corrosion Cracking of Stainless Steel Canister for Concrete Cask Storage of Spent Nuclear FuelCorrosion, 2009
- Evaluation method of corrosion lifetime of conventional stainless steel canister under oceanic air environmentNuclear Engineering and Design, 2008
- The effect of prior deformation on stress corrosion cracking growth rates of Alloy 600 materials in a simulated pressurized water reactor primary waterCorrosion Science, 2008