Investigation of In-Cylinder Steam Injection in a Turbocharged Diesel Engine for Waste Heat Recovery and NOx Emission Control
Open Access
Abstract
In this study, an in-cylinder steam injection method is introduced and applied to a turbocharged diesel engine for waste heat recovery and NOx emission reduction. In the method, cool water was first heated into superheated steam by exhaust. Then the superheated steam was directly injected into the cylinder during the compression stroke. The potential for fuel savings and NOx emission reduction obtained by this method was investigated. First, a two-zone combustion model for the baseline engine was established and calibrated with the experimental data. Based on the model, the effects of steam injection mass, temperature, and timing on engine performance and NOx emission were investigated. The results demonstrate that in-cylinder steam injection can improve engine performance and reduce NOx emissions significantly at all engine speeds. Optimal steam injection mass is obtained under full load at engine speed from 1000 rpm to 1900 rpm when the steam injection timing and temperature are −30° and 550 K, respectively. Under those conditions, engine torque is increased by 9.5–10.9%, brake-specific fuel consumption (BSFC) is reduced by 8.6–9.9%, and NOx emission is decreased by 83.4–91.8%. Steam injection mass and injection timing are the main parameters that significantly affect engine performance and NOx emission.Keywords
Funding Information
- Guangdong Province Public Welfare Research and Capacity Building Grant (2014B010106004)
This publication has 37 references indexed in Scilit:
- A Comparative Study of the Effect of Turbocompounding and ORC Waste Heat Recovery Systems on the Performance of a Turbocharged Heavy-Duty Diesel EngineEnergies, 2017
- Waste Heat Recovery from Marine Gas Turbines and Diesel EnginesEnergies, 2017
- Numerical Investigation of the Effects of Split Injection Strategies on Combustion and Emission in an Opposed-Piston, Opposed-Cylinder (OPOC) Two-Stroke Diesel EngineEnergies, 2017
- Effects of a Dual-Loop Exhaust Gas Recirculation System and Variable Nozzle Turbine Control on the Operating Parameters of an Automotive Diesel EngineEnergies, 2017
- Performance Analysis of a Reciprocating Piston Expander and a Plate Type Exhaust Gas Recirculation Boiler in a Water-Based Rankine Cycle for Heat Recovery from a Heavy Duty Diesel EngineEnergies, 2016
- Decreasing NOx of a Low-Speed Two-Stroke Marine Diesel Engine by Using In-Cylinder Emission Control MeasuresEnergies, 2016
- Effects of Oxygen Content of Fuels on Combustion and Emissions of Diesel EnginesEnergies, 2016
- An open steam power cycle used for IC engine exhaust gas energy recoveryEnergy, 2012
- Water injection effects on the performance and emission characteristics of a CI engine operating with biodieselRenewable Energy, 2012
- Experimental study of inlet manifold water injection on combustion and emissions of an automotive direct injection Diesel engineEnergy, 2010