Effect of Varying Jet Diameter on the Heat Transfer Distributions of Narrow Impingement Channels
- 10 September 2014
- journal article
- Published by Wiley in Journal of Turbomachinery
- Vol. 137 (2) , 021004
Abstract
The development of integrally cast turbine airfoils allows the production of narrow impingement channels in a double-wall configuration, where the coolant is practically injected within the wall of the airfoil providing increased heat transfer capabilities. This study examines the cooling performance of narrow impingement channels with varying jet diameters using a single exit design in an attempt to regulate the generated crossflow. The channel consists of a single row of five inline jets tested at two different channel heights and over a range of engine representative Reynolds numbers. Detailed heat transfer coefficient distributions are evaluated over the complete interior surfaces of the channel using the transient liquid crystal technique. Additionally, local jet discharge coefficients are determined by probe traversing measurements for each individual jet. A 10%-increasing and a 10%-decreasing jet diameter pattern are compared with a baseline geometry of uniform jet size distribution, indicating a considerable effect of varying jet diameter on the heat transfer level and the development of the generated crossflow.Keywords
This publication has 28 references indexed in Scilit:
- Detailed Heat Transfer Distributions of Narrow Impingement Channels for Cast-In Turbine AirfoilsJournal of Turbomachinery, 2014
- Hole Staggering Effect on the Cooling Performance of Narrow Impingement Channels Using the Transient Liquid Crystal TechniqueJournal of Heat Transfer, 2014
- Multiple Jet Impingement - A ReviewHeat Transfer Research, 2011
- Turbine Airfoil Aerothermal Characteristics in Future Coal—Gas-Based Power Generation SystemsHeat Transfer Research, 2010
- Enhancement of Impingement Cooling in a High Cross Flow Channel Using Shaped Impingement Cooling HolesJournal of Turbomachinery, 2009
- The Effect of Initial Cross Flow on the Cooling Performance of a Narrow Impingement ChannelJournal of Heat Transfer, 2005
- In-Wall Network (Mesh) Cooling Augmentation of Gas Turbine Airfoils2004
- Full Surface Local Heat Transfer Coefficient Measurements in a Model of an Integrally Cast Impingement Cooling GeometryJournal of Turbomachinery, 1998
- Impingement Heat Transfer Within Arrays of Circular Jets: Part 1—Effects of Minimum, Intermediate, and Complete Crossflow for Small and Large SpacingsJournal of Heat Transfer, 1987
- Streamwise Flow and Heat Transfer Distributions for Jet Array Impingement with CrossflowJournal of Heat Transfer, 1981