Controlling surface properties of polyelectrolyte multilayers by assembly pH
Author:
- 30 April 2013
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 15 (25) , 10459-10465
Abstract
The control of surface properties such as the morphology, roughness, stiffness, and wettability of polyelectrolyte multilayers was carried out using poly(diallyldimethylammonium chloride) (PDADMAC) and poly(4-styrenesulfonic acid-co-maleic acid, 1 : 1 SS : MA) sodium salt (PSSMA 1 : 1) as the building blocks via adjusting the assembly pH value. We found that the surface roughness of the multilayers increased with increasing assembly pH value, and that the morphology was quite different at various assembly pH values when PSSMA was assembled as the final layer. However, the surface roughness and morphology of the multilayers (PDADMAC as the final layer) showed no apparent change at various assembly pH values. Interestingly, the stiffness of the PSSMA/PDADMAC multilayers could be tuned. Nanoindentation measurements by SFM showed that the hardness of the multilayers was very different at various pH values when PSSMA was the outermost layer. Conversely, the hardness of the multilayers remained unchanged regardless of the pH when PDADMAC was the outermost layer. The water contact angle hysteresis (the difference between the advancing and receding contact angles) of the multilayers was largely affected by both surface roughness and surface hydrophilic groups which could also be tuned by assembly pH.Keywords
This publication has 19 references indexed in Scilit:
- Controlling Diffusion and Exchange in Layer-by-Layer AssembliesMacromolecules, 2007
- Assembly of Multilayer Films from Polyelectrolytes Containing Weak and Strong Acid MoietiesLangmuir, 2005
- Counteranion-Controlled Properties of Polyelectrolyte MultilayersMacromolecules, 2004
- Influence of Adsorption Conditions on the Structure of Polyelectrolyte MultilayersLangmuir, 2002
- pH-Dependent Thickness Behavior of Sequentially Adsorbed Layers of Weak PolyelectrolytesMacromolecules, 2000
- Controlling Bilayer Composition and Surface Wettability of Sequentially Adsorbed Multilayers of Weak PolyelectrolytesMacromolecules, 1998
- Fuzzy Nanoassemblies: Toward Layered Polymeric MulticompositesScience, 1997
- Buildup of ultrathin multilayer films by a self-assembly process: III. Consecutively alternating adsorption of anionic and cationic polyelectrolytes on charged surfacesThin Solid Films, 1992
- Buildup of ultrathin multilayer films by a self‐assembly process, 1 consecutive adsorption of anionic and cationic bipolar amphiphiles on charged surfacesMakromolekulare Chemie. Macromolecular Symposia, 1991
- Multilayers of colloidal particlesJournal of Colloid and Interface Science, 1966