Accuracy of Selective Laser Melted Bar Retaining Mandibular Implant-Assisted Overdenture: An In Vitro Comparison of Different Impression Materials and Techniques
Authors:
- 1 December 2023
- journal article
- research article
- Published by American Academy of Implant Dentistry in Journal of Oral Implantology
- Vol. 49 (6) , 590-598
Abstract
This study aimed to assess the accuracy of the marginal fit of 2 implant-supported overdenture bars fabricated with selective laser melting technology, using polyvinyl siloxane and vinyl siloxane ether impression materials and different impression techniques. Two implants with multi-unit abutments were inserted in a 3D-printed mandibular model and used as a reference model, then duplicated into a stone cast to fabricate custom trays for obtaining impressions with polyvinyl siloxane and vinyl siloxane ether impression materials, using both open and closed-tray techniques. This resulted in a total of 4 groups, each with 8 specimens. The impressions were poured and scanned, and 32 cobalt-chromium bars were fabricated using selective laser melting technology. Each bar was screwed onto one abutment of the reference model, and a standardized digital periapical radiograph of the opposite unscrewed side was taken; this process was repeated to the other abutment. The vertical misfit was measured at 3 predetermined positions on the unscrewed side, and 6 values per bar were recorded. The mean gap distance was measured, and the data were subjected to statistical analysis; the present study found that the open-tray technique with vinyl polyether siloxane impression material may offer improved accuracy for obtaining impressions for 2 implant-supported bars. The open-tray technique groups also showed better marginal fit than the closed-tray groups. However, further clinical research is required to confirm these findings.Keywords
This publication has 51 references indexed in Scilit:
- Fit of complete-arch implant-supported prostheses produced from an intraoral scan by using an auxiliary device and from an elastomeric impression: A pilot clinical trialThe Journal of Prosthetic Dentistry, 2022
- Assessment of impression material accuracy in complete-arch restorations on four implantsThe Journal of Prosthetic Dentistry, 2021
- Comparison of conventional, photogrammetry, and intraoral scanning accuracy of complete-arch implant impression procedures evaluated with a coordinate measuring machineThe Journal of Prosthetic Dentistry, 2021
- Conventional open-tray impression versus intraoral digital scan for implant-level complete-arch impressionThe Journal of Prosthetic Dentistry, 2019
- Contact angle of unset elastomeric impression materialsThe Journal of Prosthetic Dentistry, 2015
- Digital evaluation of the accuracy of impression techniques and materials in angulated implantsJournal of Dentistry, 2014
- Applicability and accuracy of an intraoral scanner for scanning multiple implants in edentulous mandibles: A pilot studyThe Journal of Prosthetic Dentistry, 2014
- Passive Fit in Screw Retained Multi-unit Implant Prosthesis Understanding and Achieving: A Review of the LiteratureThe Journal of Indian Prosthodontic Society, 2013
- Evaluation of impression accuracy for a four-implant mandibular model—a digital approachClinical Oral Investigations, 2011
- An evaluation of impression techniques for multiple internal connection implant prosthesesThe Journal of Prosthetic Dentistry, 2004