A ZVS Interleaved Boost AC/DC Converter Used in Plug-in Electric Vehicles
Authors:
- 1 August 2012
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 27 (8) , 3513-3529
Abstract
This paper presents a novel, yet simple zero-voltage switching (ZVS) interleaved boost power factor correction (PFC) ac/dc converter used to charge the traction battery of an electric vehicle from the utility mains. The proposed opology consists of a passive auxiliary circuit, placed between two phases of the interleaved front-end boost PFC converter, which provides enough current to charge and discharge the MOSFETs' output capacitors during turn-ON times. Therefore, the MOSFETs are turned ON at zero voltage. The proposed converter maintains ZVS for the universal input voltage (85 to 265 Vrms), which includes a very wide range of duty ratios (0.07-1). In addition, the control system optimizes the amount of reactive current required to guarantee ZVS during the line cycle for different load conditions. This optimization is crucial in this application since the converter may work at very light loads for a long period of time. Experimental results from a 3 kW ac/dc converter are presented in the paper to evaluate the performance of the proposed converter. The results show a considerable increase in efficiency and superior performance of the proposed converter compared to the conventional hard-switched interleaved boost PFC converter.Keywords
This publication has 32 references indexed in Scilit:
- A Load Adaptive Control Approach for a Zero-Voltage-Switching DC/DC Converter Used for Electric VehiclesIEEE Transactions on Industrial Electronics, 2011
- A High-Performance Single-Phase Bridgeless Interleaved PFC Converter for Plug-in Hybrid Electric Vehicle Battery ChargersIEEE Transactions on Industry Applications, 2011
- A Novel SFVM-M$^{\bm 3}$ Control Scheme for Interleaved CCM/DCM Boundary-Mode Boost Converter in PFC ApplicationsIEEE Transactions on Power Electronics, 2010
- Two-Stage Isolated Switch-Mode Power Supply With High Efficiency and High Input Power FactorIEEE Transactions on Industrial Electronics, 2010
- Guideline for a Simplified Differential-Mode EMI Filter DesignIEEE Transactions on Industrial Electronics, 2009
- Passive and Active Hybrid Integrated EMI FiltersIEEE Transactions on Power Electronics, 2009
- A Study of AC-DC ZVS-PWM Boost Converters with Silicon Carbide Diodes2009
- Interleaved Boost Converter With Intrinsic Voltage-Doubler Characteristic for Universal-Line PFC Front EndIEEE Transactions on Power Electronics, 2007
- High efficiency telecom rectifier using a novel soft-switched boost-based input current shaper2002
- A comparison of voltage-mode soft-switching methods for PWM convertersIEEE Transactions on Power Electronics, 1997