Electrochemical Investigation of Lithium Perchlorate-Doped Polypyrrole Growing on Titanium Substrate
Open Access
- 22 April 2024
- journal article
- research article
- Published by MDPI AG in Inorganics
- Vol. 12 (4) , 125
Abstract
Lithium perchlorate-doped polypyrrole growing on titanium substrate (LiClO4-PPy/Ti) has been fabricated to act as electroactive electrode material for feasible electrochemical energy storage. A theoretical and experimental investigation is adopted to disclose the conductivity, electroactivity properties and interfacial interaction-dependent capacitance of LiClO4-PPy/Ti electrode. The experimental measurement results disclose that LiClO4-PPy/Ti reveals lower ohmic resistance (0.2226 Ω cm−2) and charge transfer resistance (2116 Ω cm−2) to exhibit higher electrochemical conductivity, a more reactive surface, and feasible ion diffusion to present higher double-layer capacitance (0.1930 mF cm−2) rather than LiClO4/Ti (0.3660 Ω cm−2, 65,250 Ω cm−2, 0.0334 mF cm−2). LiClO4-PPy/Ti reveals higher Faradaic capacitance caused by the reversible doping and dedoping process of perchlorate ion on PPy than the electrical double-layer capacitance of LiClO4/Ti caused by the reversible adsorption and desorption process of the LiClO4 electrolyte on Ti. Theoretical simulation calculation results prove that a more intensive electrostatic interaction of pyrrole N···Ti (2.450 Å) in LiClO4-PPy/Ti rather than perchlorate O···Ti (3.537 Å) in LiClO4/Ti. LiClO4-PPy/Ti exhibits higher density of states (57.321 electrons/eV) at Fermi energy and lower HOMO-LUMO molecule orbital energy gap (0.032 eV) than LiClO4/Ti (9.652 electrons/eV, 0.340 eV) to present the enhanced electronic conductivity. LiClO4-PPy/Ti also exhibits a more declined interface energy (−1.461 × 104) than LiClO4/Ti (−5.202 × 103 eV) to present the intensified interfacial interaction. LiClO4-PPy/Ti accordingly exhibits much higher specific capacitances of 0.123~0.0122 mF cm−2 at current densities of 0.01~0.10 mA cm−2 rather than LiClO4/Ti (0.010~0.0095 mF cm−2, presenting superior electroactivity and electrochemical capacitance properties. LiClO4-PPy/Ti could well act as the electroactive supercapacitor electrode for feasible energy storage.Keywords
Funding Information
- Science and Technology Program of Suzhou City, China (SYG202342)
This publication has 37 references indexed in Scilit:
- Electrochemical performance of bridge molecule-reinforced activated carbon fiber-m-aminobenzenesulfonic acid-polyaniline for braidable-supercapacitor applicationChemical Engineering Journal, 2023
- Manganese oxide as an effective electrode material for energy storage: a reviewEnvironmental Chemistry Letters, 2021
- Electrochemical Performance of Polyaniline Support on Electrochemical Activated Carbon FiberJournal of Materials Engineering and Performance, 2021
- Electrochemical and Hydrothermal Activation of Carbon Fiber Supercapacitor ElectrodeFibers and Polymers, 2021
- Conducting polypyrrole-coated macroporous melamine sponges: a simple toy or an advanced material?Chemical Papers, 2021
- Intrinsically conducting polymers and their combinations with redox-active molecules for rechargeable battery electrodes: an updateChemical Papers, 2021
- Metal oxides nanostructure-based electrode materials for supercapacitor applicationJournal of Nanoparticle Research, 2020
- Newly Design Porous/Sponge Red Phosphorus@Graphene and Highly Conductive Ni2P Electrode for Asymmetric Solid State Supercapacitive Device With Excellent PerformanceNano-Micro Letters, 2020
- Suitable Electrode Materials for Titanium Sheet DepositionAdvanced Engineering Materials, 2019
- Titanium plate supported MoS2 nanosheet arrays for supercapacitor applicationApplied Surface Science, 2017