Semiconductor–Electrocatalyst Interfaces: Theory, Experiment, and Applications in Photoelectrochemical Water Splitting
- 1 April 2016
- journal article
- research article
- Published by American Chemical Society (ACS) in Accounts of Chemical Research
- Vol. 49 (4) , 733-740
Abstract
Light-absorbing semiconductor electrodes coated with electrocatalysts are key components of photoelectrochemical energy conversion and storage systems. Efforts to optimize these systems have been slowed by an inadequate understanding of the semiconductor–electrocatalyst (sem|cat) interface. The sem|cat interface is important because it separates and collects photoexcited charge carriers from the semiconductor. The photovoltage generated by the interface drives “uphill” photochemical reactions, such as water splitting to form hydrogen fuel. Here we describe efforts to understand the microscopic processes and materials parameters governing interfacial electron transfer between light-absorbing semiconductors, electrocatalysts, and solution. We highlight the properties of transition-metal oxyhydroxide electrocatalysts, such as Ni(Fe)OOH, because they are the fastest oxygen-evolution catalysts known in alkaline media and are (typically) permeable to electrolyte. We describe the physics that govern the charge-transfer kinetics for different interface types, and show how numerical simulations can explain the response of composite systems. Emphasis is placed on “limiting” behavior. Electrocatalysts that are permeable to electrolyte form “adaptive” junctions where the interface energetics change during operation as charge accumulates in the catalyst, but is screened locally by electrolyte ions. Electrocatalysts that are dense, and thus impermeable to electrolyte, form buried junctions where the interface physics are unchanged during operation. Experiments to directly measure the interface behavior and test the theory/simulations are challenging because conventional photoelectrochemical techniques do not measure the electrocatalyst potential during operation. We developed dual-working-electrode (DWE) photoelectrochemistry to address this limitation. A second electrode is attached to the catalyst layer to sense or control current/voltage independent from that of the semiconductor back ohmic contact. Consistent with simulations, electrolyte-permeable, redox-active catalysts such as Ni(Fe)OOH form “adaptive” junctions where the effective barrier height for electron exchange depends on the potential of the catalyst. This is in contrast to sem|cat interfaces with dense electrolyte-impermeable catalysts, such as nanocrystalline IrOx, that behave like solid-state buried (Schottky-like) junctions. These results elucidate a design principle for catalyzed photoelectrodes. The buried heterojunctions formed by dense catalysts are often limited by Fermi-level pinning and low photovoltages. Catalysts deposited by “soft” methods, such as electrodeposition, form adaptive junctions that tend to provide larger photovoltages and efficiencies. We also preview efforts to improve theory/simulations to account for the presence of surface states and discuss the prospect of carrier-selective catalyst contacts.Keywords
Funding Information
- Basic Energy Sciences (DE-SC0014279)
This publication has 52 references indexed in Scilit:
- Mechanistic insights into solar water oxidation by cobalt-phosphate-modified α-Fe 2 O 3 photoanodesEnergy & Environmental Science, 2014
- Enhanced photocatalytic water oxidation efficiency with Ni(OH)2 catalysts deposited on α-Fe2O3via ALDChemical Communications, 2014
- Enhanced photoelectrochemical water-splitting performance of semiconductors by surface passivation layersEnergy & Environmental Science, 2014
- Photoelectrochemical Water Splitting at Semiconductor Electrodes: Fundamental Problems and New PerspectivesChemphyschem, 2014
- Back Electron–Hole Recombination in Hematite Photoanodes for Water SplittingJournal of the American Chemical Society, 2014
- Hematite‐Based Water Splitting with Low Turn‐On VoltagesAngewandte Chemie International Edition, 2013
- An Optocatalytic Model for Semiconductor–Catalyst Water-Splitting Photoelectrodes Based on In Situ Optical Measurements on Operational CatalystsThe Journal of Physical Chemistry Letters, 2013
- Catalyst or spectator?Nature Chemistry, 2012
- Dynamics of photogenerated holes in surface modified α-Fe 2 O 3 photoanodes for solar water splittingProceedings of the National Academy of Sciences, 2012
- Near-Complete Suppression of Surface Recombination in Solar Photoelectrolysis by “Co-Pi” Catalyst-Modified W:BiVO4Journal of the American Chemical Society, 2011