Synthesis and characterization of moisture‐cured polyurethane membranes and their applications in pervaporation separation of ethyl acetate/water azeotrope at 30°C
- 19 December 2006
- journal article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 103 (5) , 3405-3414
Abstract
NCO‐terminated polyurethane membranes were prepared using diisocyanate, diol, and trimethylolpropane (TMP) using an NCO/OH ratio of 1.6 : 1. Prepolymer was chain‐extended using cellulose acetate butyrate (CAB) in the ratios of 2 : 1, 4 : 1, and 3 : 1 of NCO/OH. Polyurethane (PU) membranes were characterized by differential scanning calorimeter (DSC) and thermogravimetry (TGA) to investigate their thermal properties. Equilibrium sorption studies were carried out at 30°C in water and ethyl acetate media as well as in their binary mixtures. The influence of CAB on pervaporation (PV) separation of an ethyl acetate/water (92/8, w/w, i.e., azeotropic composition) mixture was investigated. Membranes in this study showed a selectivity of 42.42 with a flux value of 0.187 kg/m/h for 3 : 1% NCO/OH containing PU membrane. In order to gain a more detailed picture of the molecular transport phenomenon, we performed the sorption gravimetric experiments at 30°, 35°, 40°, and 50°C to compute diffusion, swelling, sorption, and permeability coefficients of PU membranes in the azeotropic mixture of ethyl acetate and water. Activation parameters for diffusion and permeation were computed from the Arrhenius equation to understand the polymer/solvent interactions. Sorption trends and diffusion anomalies were established through an empirical equation after estimating the diffusion parameters. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3405–3414, 2007Keywords
This publication has 25 references indexed in Scilit:
- Preparation and study of crosslinked polyurethane films to fractionate toluene–n-heptane mixtures by pervaporationSeparation and Purification Technology, 2001
- Design of polypropylene oxide/polybutadiene bi-soft segment urethane/urea polymer for pervaporation membranesPolymer, 1999
- Fractionation of benzene/n-hexane mixtures by pervaporation using polyurethane membranesBrazilian Journal of Chemical Engineering, 1999
- A study on pervaporation of aqueous ethanol solution by modified polyurethane membraneJournal of Membrane Science, 1999
- Synthesis, characterization, and pervaporation properties of segmented poly(urethane-urea)sJournal of Applied Polymer Science, 1999
- A High Performance Membrane for Sorption and Pervaporation Separation of Ethyltert-Butyl Ether and Ethanol MixturesSeparation Science and Technology, 1999
- Microphase Separation and Rheological Properties of Polyurethane Melts. 1. Effect of Block LengthMacromolecules, 1998
- Pervaporation Separation of Organic-Aqueous and Organic-Organic Binary MixturesJournal of Macromolecular Science, Part C: Polymer Reviews, 1994
- Cationic/anionic interpenetrating polymer network membranes for the pervaporation of ethanol-water mixtureJournal of Membrane Science, 1990
- Hydrophilic/hydrophobic IPN membranes for the pervaporation of ethanol-water mixturePolymer Bulletin, 1988