Comparative Analysis of Mechanical and Thermal Properties of Lime Concrete Blocks Made with Pigeon Pea and Carrot Grass Plants as Partial Replacement of Fine Aggregates
Open Access
- 1 January 2024
- journal article
- research article
- Published by International Digital Organization for Scientific Information (IDOSI) in International Journal of Engineering
- Vol. 37 (12) , 2481-2488
Abstract
This paper presents a comparative analysis of the mechanical and thermal properties of two agro-waste natural fibers, pigeon pea (PP) and santa maria feverfew (SMF) based lime concretes. The specimens were tested using destructive and nondestructive testing methods. The mechanical properties were measured using a compression testing machine (C.T.M.). A non-destructive test was performed using an ultrasonic pulse velocity meter. A self-fabricated box was used to evaluate the thermal conductivities of the concrete blocks under controlled conditions with agro-waste. The results showed that the concrete blocks made with 3.45% SMF by weight has compressive strength 33.3% higher than that made with 3.45% PP fiber. The ultrasonic wave velocity was the highest in the control blocks made of plain lime concrete and the lowest in the PP fiber-based lime concrete blocks. Porosity and thermal insulation properties have been reported to be excellent in PP fiber-based concrete blocks compared with SMF fiber-based concrete blocks. Such natural fiber-based concretes, which are light weight and have better thermal resistance, can be used for the construction of non-load bearing partition walls, insulation of walls and slabs, and preparation of lean concrete.Keywords
This publication has 23 references indexed in Scilit:
- Effects of Strain Rate and Fiber Content on the Dynamic Mechanical Properties of Sisal Fiber Cement-Based CompositesJournal of Renewable Materials, 2023
- Use of hemp, kenaf and bamboo natural fiber in cement-based concreteMaterials Today: Proceedings, 2022
- The comparative study on the performance of bamboo fiber and sugarcane bagasse fiber as modifiers in asphalt concrete productionHeliyon, 2022
- Rheological, mechanical properties, and statistical significance analysis of shotcrete with various natural fibers and mixing ratiosCase Studies in Construction Materials, 2022
- Cementitious composites made with natural fibers: Investigation of uncoated and coated sisal fibersCase Studies in Construction Materials, 2022
- Decomposition analytics of carbon emissions by cement manufacturing – a way forward towards carbon neutrality in a developing countryEnvironmental Science and Pollution Research, 2022
- Treatment methods for plant fibers for use as reinforcement in cement-based materialsCellulose, 2021
- A review of the properties of hemp concrete for green building applicationsJournal of Cleaner Production, 2019
- Correlation between compressive strength and ultrasonic pulse velocity of high strength concrete incorporating chopped basalt fibreAIP Conference Proceedings, 2015
- Corrosion behavior of steel bar embedded in fly ash concreteCorrosion Science, 2006