Microstructure and Properties of 1.0C–1.5Cr Bearing Steel in Processes of Hot Rolling, Spheroidization, Quenching, and Tempering
Authors:
- 2 January 2019
- journal article
- research article
- Published by Wiley in Steel Research International
- Vol. 90 (3)
Abstract
A novel online subcritical spheroidization annealing technology is proposed. To verify the validity and advantage, microstructure, and properties of 1.0C–1.5Cr bearing steel in three process of hot rolling, spheroidization, quenching, and tempering are investigated. It is demonstrated that the refining of hot rolled microstructure is beneficial to obtaining finer spheroidized microstructure, which accelerates cementite dissolution during the austenitization process of subsequent quenching treatment. When the ferrite grain size of spheroidized microstructure decreases from 8.3 to 1.7 µm, and mean diameter of spheroidized cementite decreases from 0.38 to 0.22 µm, the prior austenite grain size of the microstructure quenched from 850 °C decreases by about 27%, and mean diameter of undissolved cementite decreases by at least 20%. The fatigue limit of the tested steel after quenching and tempering is measured. It is increased from 789 to 986 MPa due to the comprehensive effect of the refining of both undissolved cementite and prior austenite grain, and the increase of retained austenite content in the martensite matrix.Keywords
Funding Information
- National High Technology Research and Development Program of China (2012AA03A503)
- Research Fund for the Doctoral Program of Higher Education of China (20130042110040)
- Fundamental Research Funds for the Central Universities (N130607002)
This publication has 38 references indexed in Scilit:
- Effect of cold deformation on the microstructure and impact toughness during the austenitizing process of 1.0C–1.5Cr bearing steelMaterials Science and Engineering: A, 2016
- Effects of Annealing on Carbides Size and Distribution and Cold Formability of 1.0C-1.5Cr Bearing SteelMetallurgical and Materials Transactions A, 2015
- Influence of the Initial Microstructure on the Spheroidization of SAE 52100 Bearing SteelSteel Research International, 2015
- The ϵ→η→θ transition in 100Cr6 and its effect on mechanical propertiesActa Materialia, 2012
- Fatigue Strength Improvement of AISI E52100 Bearing Steel by Induction Heating and Repeated QuenchingMaterials Science, 2012
- Steels for bearingsProgress in Materials Science, 2012
- Effect of Repeated Induction Heating on Fatigue Crack Propagation in SAE 52100 Bearing SteelAdvanced Materials Research, 2011
- Grain refinement in bearing steels using a double-quenching heat-treatment processInternational Journal of Automotive Technology, 2009
- Effect of Prior Cold Work on the Martensite Transformation in SAE 52100Metallurgical Transactions A, 1984
- Carbide refining heat treatments for 52100 bearing steelMetallurgical Transactions, 1974