Modification of plywood with phenol–formaldehyde resin: substitution of phenol by pyrolysis cleavage products of softwood kraft lignin
Open Access
- 5 January 2024
- journal article
- research article
- Published by Springer Nature in European Journal of Wood and Wood Products
- Vol. 82 (2) , 309-319
Abstract
The modification by impregnation of veneers for the production of plywood with phenol–formaldehyde resins is a well-known method to improve the dimensional stability and fungal resistance. Because phenol is obtained from non-renewable resources, finding substitutes has been a topic of research. Due to similarities in chemical structure and availability, lignin cleavage products present a promising alternative. In this study, microwave-assisted pyrolysis cleavage products of softwood kraft lignin have been used to substitute 30% of phenol in phenol–formaldehyde resins. Scots pine veneers were impregnated with the resin, and five-layered plywoods were produced. The influence of the substitution on the bonding quality, the dimensional stability, and the leaching of resin from the specimens were studied. Mechanical properties such as the bending strength, the modulus of elasticity, as well as the dynamic impact bending strength of the plywood were analyzed. Both treatments led to plywood with good dimensional stability, and the resin was stable against leaching. The substitution of phenol with lignin cleavage products led to slightly reduced brittleness of the specimens compared to pure phenol–formaldehyde resin. This study presents a method to reduce the use of non-renewable resources, increase the use of currently underutilized lignin sources, and produce plywood with promising properties for exterior applications.Keywords
Funding Information
- Forschungszentrum Jülich GmbH (031B0952, 031B0952)
- Georg-August-Universität Göttingen
This publication has 33 references indexed in Scilit:
- Lignin pyrolysis for profitable lignocellulosic biorefineriesBiofuels, Bioproducts and Biorefining, 2014
- Optimization of some panel manufacturing parameters for the best bonding strength of plywoodInternational Journal of Adhesion and Adhesives, 2013
- Research on Chemical Modification of Wood of Fast-Growing PoplarAdvanced Materials Research, 2013
- Potential of shortening pressing time or reducing pressing temperature for plywood resinated with PF resin modified using alcohols and estersEuropean Journal of Wood and Wood Products, 2010
- Properties Enhancement of Oil Palm Plywood through Veneer Pretreatment with Low Molecular Weight Phenol-Formaldehyde ResinJournal of Adhesion Science and Technology, 2010
- Compreg-type products by furfurylation during hot-pressingWood Material Science & Engineering, 2009
- The modification of wood by treatment with low molecular weight phenol-formaldehyde resin: a properties enhancement with neutralized phenolic-resin and resin penetration into wood cell wallsWood Science and Technology, 2004
- Addition of Boron Based Compound in the LVL Glueline: Effect on the Mechanical Properties and the Leaching of BoronHolzforschung, 2001
- Resin-Treated PlywoodIndustrial & Engineering Chemistry, 1939
- Minimizing Wood Shrinkage and SwellingIndustrial & Engineering Chemistry, 1936