Investigation on leaching behaviour of toxic metals from biomedical ash and its controlling mechanism
- 7 January 2019
- journal article
- research article
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 26 (6) , 6191-6198
Abstract
It is comprehensible that disposal of biomedical ash (BMA) is a serious threat to human life and to the environment compared to any other type of waste without proper treatment. In the present study, it is focused in studying the leaching behaviour and its controlling mechanism to predict the contamination levels of BMA. Experimental investigation was carried out to determine the physico-chemical properties of BMA. The morphological and mineralogical composition was performed by SEM equipped with EDAX and XRD. A leaching pattern was identified for various heavy metals simultaneously (Hg, Se, As, Fe, Cd, Zn, Pb, Ca, Co, Ni, Cr and Cu) by varying pH (3, 5, 7, 9, and 11) via a pH-dependent batch leaching test using AAS and ICP. Major oxidation states of leached mineral/metal were established by Visual MINTEQA 3.1. Leaching test results show that a high concentration of Hg (9.3 mg/l), Se (2.4 mg/l) and As (9.7 mg/l) at pH 11 was obtained. Characterisation studies substantiate 60% of calcium silicate presence and major minerals like ettringite, calcite and thermonatrite. Geochemical modelling reveals that leached elements were solubility controlled except As and Se. It is inferred that, presence/formation of ettringite, calcite and thermonatrite minerals are responsible for immobilizing/reduced leaching of toxic heavy metals in alkaline environment except for Hg, Se and As as they are highly mobile in an alkaline condition which can be reduced by adopting a suitable pretreatment option so as to reduce the contamination levels of handling even untreated waste disposal.Keywords
This publication has 30 references indexed in Scilit:
- Effect of Volcanic Ash Incorporation on the Mechanical Properties and Surface Morphology of Hydrated Cement PasteJournal of Materials in Civil Engineering, 2017
- Leaching modelling of slurry-phase carbonated steel slagJournal of Hazardous Materials, 2016
- Characterization of bottom ash from two hospital waste incinerators in Rabat, MoroccoWaste Management & Research: The Journal for a Sustainable Circular Economy, 2013
- Solidification/stabilization of fly and bottom ash from medical waste incineration facilityJournal of Hazardous Materials, 2012
- Leaching mechanisms of oxyanionic metalloid and metal species in alkaline solid wastes: A reviewApplied Geochemistry, 2008
- Evaluation of ettringite and hydrocalumite formation for heavy metal immobilization: Literature review and experimental studyJournal of Hazardous Materials, 2006
- The leaching of major and trace elements from MSWI bottom ash as a function of pH and timeApplied Geochemistry, 2006
- Stabilization and utilization of hospital waste as road and asphalt aggregateJournal of Material Cycles and Waste Management, 2005
- Investigation of the CaO–Al2O3–SiO2–CaSO4–CaCO3–H2O system at 25°C by thermodynamic calculationAdvances in Cement Research, 2004
- Results of a hospital waste survey in private hospitals in Fars province, IranWaste Management, 2004