Strong Surface Bonding of Polysulfides by Teflonized Carbon Matrix for Enhanced Performance in Room Temperature Sodium‐Sulfur Battery
- 13 February 2019
- journal article
- research article
- Published by Wiley in Advanced Materials Interfaces
- Vol. 6 (7)
Abstract
The practical application of room temperature sodium‐sulfur (Na–S) battery remains far away from the market due to the poor coulombic efficiency and cyclic stability which in turn arises from high dissolution of intermediate polysulfides in carbonate‐based electrolytes, slow reaction kinetics, and low electrical conductivity of sulfur. In this aspect, an advanced cathode structure by incorporating Teflon‐lined conductive carbon substrate (TCS) as a supporting cathode to efficiently immobilize the migration of soluble polysulfides to the anode, as well as enhance the conductivity during the polysulfide conversion, is presented here. After inclusion of TCS, the cell delivers a specific capacity of 800 mAh g−1 at 0.1C (1C = 1672 mA g−1) with 85% enhancement in specific capacity. Also, a stable cyclic stability of about 300 cycles with an excellent capacity retention of about 93% and coulombic efficiency of nearly 100% is obtained. Teflon, which has a linear carbon chain surrounded completely by fluorine atoms, acts as the anchoring sites for trapping the intermediate sodium polysulfides. This study provides a simple approach of controlling the shuttling effect, which can be beneficial for the development of high energy density room temperature Na–S battery.Keywords
Funding Information
- Indian Institute of Technology Madras
- Department of Science and Technology, Ministry of Science and Technology
This publication has 40 references indexed in Scilit:
- High performance lithium–sulfur batteries: advances and challengesJournal of Materials Chemistry A, 2014
- Shuttle suppression in room temperature sodium–sulfur batteries using ion selective polymer membranesChemical Communications, 2014
- Thermodynamics and cell chemistry of room temperature sodium/sulfur cells with liquid and liquid/solid electrolyteJournal of Power Sources, 2013
- Smaller Sulfur Molecules Promise Better Lithium–Sulfur BatteriesJournal of the American Chemical Society, 2012
- Main Challenges for High Performance NAS Battery: Materials and InterfacesAdvanced Functional Materials, 2012
- Studies on poly(vinylidene fluoride-co-hexafluoropropylene) based gel electrolyte nanocomposite for sodium–sulfur batteriesSolid State Ionics, 2011
- Chemical doping of grapheneJournal of Materials Chemistry, 2010
- Enhancement of long stability of sulfur cathode by encapsulating sulfur into micropores of carbon spheresEnergy & Environmental Science, 2010
- Thermal analysis of sulfurization of polyacrylonitrile with elemental sulfurJournal of Thermal Analysis and Calorimetry, 2008
- XPS of sulphide mineral surfaces: metal-deficient, polysulphides, defects and elemental sulphurSurface and Interface Analysis, 1999