Boron-doped amorphous diamondlike carbon as a new p-type window material in amorphous silicon p-i-n solar cells
Authors:
- 5 January 1998
- journal article
- conference paper
- Published by AIP Publishing in Applied Physics Letters
- Vol. 72 (1) , 106-108
Abstract
A boron-doped hydrogenated amorphous diamondlike carbon was prepared using a mercury-sensitized photochemical vapor deposition (photo-CVD) method. The source gases were and By increasing the boron doping ratio from 0 to 12 000 ppm, the dark conductivity increased from to A boron-doped with an energy band gap of 3.8 eV and a dark conductivity of was obtained at a doping ratio of 3600 ppm. By using this film, amorphous silicon solar cells with a novel double layer structure were fabricated using the photo-CVD method and the cell photovoltaic characteristics were investigated as a function of layer thickness. The open circuit voltage increased from 0.766 V for the conventional cell with a 40-Å-thick to 0.865 V for the cell with a (15 Å)/ (40 Å) double layer structure. The thin (<15 Å) layer proved to be an excellent hole emitter as a wide band gap window layer.
Keywords
This publication has 3 references indexed in Scilit:
- Pulsed laser deposition of hydrogenated amorphous diamond-like carbon films from a polymer targetJournal of Applied Physics, 1996
- Influence of boron doping and hydrogen dilution on p-type microcrystalline silicon carbide thin films prepared by photochemical vapor depositionJournal of Applied Physics, 1995
- Use of a carbon-alloyed graded-band-gap layer at the p/i interface to improve the photocharacteristics of amorphous silicon alloyed p-i-n solar cells prepared by photochemical vapor depositionJournal of Applied Physics, 1987