Temperature distribution and COF change of C/C-SiC friction pair
Authors:
- 8 May 2025
- journal article
- research article
- Published by Emerald Publishing in Industrial Lubrication and Tribology
- Vol. 77 (9) , 1618-1629
Abstract
Purpose: This study aims to analyze the frictional properties and temperature changes of carbon fibre reinforced silicon carbide composites (C/C-SiC) materials and promote the application of C/C-SiC materials. Design/methodology/approach: The temperature and coefficient of friction (COF) of friction pair composed of C/C-SiC were examined by a TM-I-type reduced-scale inertial braking dynamometer. The thermo-mechanically coupled model of friction pair is established to study the brake disc temperature using ADINA software. Findings: The average COF varies from 0.338 to 0.518 with the change of braking conditions. The braking pressure increased from 0.38 MPa to 0.75 MPa, and the average COF increased by 53% at 120 km/h and 7% at 200 km/h. The braking speed increased from 120 km/h to 200 km/h, the maximum temperature (MT) of the disc surface increased from 430°C to 685°C, the total duration of the temperature zone exceeding 320°C increased from 20 s to 48 s, the MT increase caused by the increase of speed was 121∼197°C and the MT increase caused by the increase of braking pressure was 30∼105°C. Originality/value: The changes in COF and temperature of C/C-SiC friction pair are revealed, providing a theoretical reference for the popularization C/C-SiC material.Keywords
This publication has 8 references indexed in Scilit:
- Friction and Wear Mechanics of Fe-Based PM Pad Paired with Carbon Fiber-Reinforced Silicon Carbide (C/C-SiC) Disk Under High-Speed BrakingTribology Transactions, 2024
- Mechanical and microstructure characterisation of 2.5D C/C-SiC composites applied for the brake disc of high-speed trainAlexandria Engineering Journal, 2024
- High-temperature mechanical properties and microstructure of 2.5D C/C–SiC composites applied for the brake disc of high-speed trainJournal of the European Ceramic Society, 2024
- Coupled thermal-structural analysis of an axle mounted C/C-SiC brake disc for high-speed trainsThermal Science and Engineering Progress, 2024
- Numerical and experimental investigation of braking performance of carbon/ceramic brakesHeat and Mass Transfer, 2023
- Optimal location of brake pad for reduction of temperature deviation on brake disc during high-energy brakingJournal of Mechanical Science and Technology, 2021
- Tribological properties and thermal-stress analysis of C/C-SiC composites during brakingTransactions of Nonferrous Metals Society of China, 2019
- A study on an analysis model for the thermo-mechanical behavior of a solid disc brake for rapid transit railway vehiclesJournal of Mechanical Science and Technology, 2018