Modelling of a Turbocharged SI Engine with Variable Camshaft Timing for Engine Control Purposes
Authors:
- F. Le BerrFBF. Le Berr
- M. MicheMMM. Miche
- G. Le SolliecGSG. Le Solliec
- F-A. LafossasFLF-A. Lafossas
- 16 October 2006
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
In the whole engine development process, 0D/1D simulation has become a powerful tool, from conception to final calibration. Within the context of control strategy design, a turbocharged spark ignition (SI) engine with variable camshaft timing has been modelled on the AMESim platform. This paper presents the different models and the methodology used to design, calibrate and validate the simulator. The validated engine model is then used for engine control purposes related to downsizing concept. Indeed, the presented control strategy acts on the in-cylinder trapped mass, the in-cylinder burnt gas fraction and the air scavenging from the intake to the exhaust. Consequently, it permits to reduce not only the fuel consumption and pollutant emissions but also to improve the transient response of the turbochargerKeywords
This publication has 13 references indexed in Scilit:
- Application of a New 1D Combustion Model to Gasoline Transient Engine OperationSAE International Journal of Advances and Current Practices in Mobility, 2005
- A New Coupling Approach Using a 1D System Simulation Software and a 3D Combustion Code Applied to Transient Engine OperationSAE International Journal of Advances and Current Practices in Mobility, 2004
- An Unstructured Parallel Solver for Multi-Phase and Reactive Flows in Internal Combustion Engines2004
- Three Dimensional Modelling of Combustion in a Direct Injection Diesel Engine Using a New Unstructured Parallel SolverLecture Notes in Computer Science, 2003
- Downsizing a Gasoline Engine Using Turbocharging with Direct InjectionSAE International Journal of Advances and Current Practices in Mobility, 2003
- Downsizing of Gasoline Engine: an Efficient Way to Reduce CO2 EmissionsOil & Gas Science and Technology – Revue d’IFP Energies nouvelles, 2003
- 3d Modeling of Mixing, Ignition and Combustion Phenomena in Highly Stratified Gasoline EnginesOil & Gas Science and Technology – Revue d’IFP Energies nouvelles, 2003
- Reactive Cfd in Engines with a New Unstructured Parallel SolverOil & Gas Science and Technology – Revue d’IFP Energies nouvelles, 2003
- Burning velocities of mixtures of air with methanol, isooctane, and indolene at high pressure and temperatureCombustion and Flame, 1982
- A Universally Applicable Equation for the Instantaneous Heat Transfer Coefficient in the Internal Combustion EngineSAE International Journal of Advances and Current Practices in Mobility, 1967