Quantifying phase transformation during the manufacturing process of AISI 430 ferritic stainless steel
Authors:
- I ColladoICI Collado
- A Núñez GalindoAGA Núñez Galindo
- A RuizARA Ruiz
- J F Almagro BelloJBJ F Almagro Bello
- F J BotanaFBF J Botana
Open Access
- 1 July 2020
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 891 (1)
Abstract
The effect of ferrite to austenite transformation phenomenon on microstructure and annealing performance of AISI 430 (EN 1.4016) ferritic stainless steel 16%Cr-0.04%C and 17%Cr-0.02%C was studied by electron backscatter diffraction and X-ray diffraction. Hot-rolled and annealed specimens of each ferritic stainless steel were collected from manufacturing route, where different states were analysed. Chemical composition shift of AISI 430 is correlated to microstructural behaviour of each material, while annealing temperature impact over grain growth phenomena is discussed.Keywords
This publication has 17 references indexed in Scilit:
- Study on microstructure and mechanical characteristics of low-carbon steel and ferritic stainless steel jointsMaterials Science and Engineering: A, 2014
- Phase Analysis on Dual-Phase Steel Using Band Slope of Electron Backscatter Diffraction PatternMicroscopy and Microanalysis, 2013
- Hot deformation behavior and microstructure evolution of a stabilized high-Cr ferritic stainless steelMaterials Science and Engineering: A, 2013
- Analysis of Chemical Changes and Microstructure Characterization during Deformation in Ferritic Stainless SteelMicroscopy and Microanalysis, 2013
- Laves phase embrittlement of the ferritic stainless steel type AISI 441Materials Science and Engineering: A, 2010
- Recent developments in stainless steelsMaterials Science and Engineering: R: Reports, 2009
- Isothermal austenite–ferrite transformation of Fe–0.04 at.% C alloy: Dilatometric measurement and kinetic analysisActa Materialia, 2008
- Phase changes of the AISI 430 ferritic stainless steels after high-temperature gas nitriding and tempering heat treatmentMaterials Science and Engineering: A, 2008
- Thermo-Calc & DICTRA, computational tools for materials scienceCalphad, 2002
- Mathematical Modeling of Iron and Steel Making Processes. Modelling of Kinetics of Austenite Formation in Steels with Different Initial Microstructures.ISIJ International, 2001