Simple beam connections in combined shear and tension
Authors:
- Susan J GuravichSGSusan J Guravich
- John L DaweJDJohn L Dawe
- 1 April 2006
- journal article
- research article
- Published by Canadian Science Publishing in Canadian Journal of Civil Engineering
- Vol. 33 (4) , 357-372
Abstract
An investigation into the behaviour of simple beam-to-column connections subjected to combined shear and tension was carried out by testing 108 full-scale specimens, including header angle, knife angle, single angle, and shear tab configurations. Specimens were rotated 0.03 rad, and a prescribed shear between zero and the design shear resistance was held constant while the specimens were loaded in tension to failure. Results showed significant differences in serviceability, ductility, interactions, and ultimate tension strength. Ductility was provided through yielding in bearing at bolt holes, bending of angle legs, and shear yielding of the gross section of connection elements. Tension and shear load versus displacement plots were acquired for all tests because of ductility and serviceability considerations in design. Existing methods of determining connection resistance, including bolt shear, net section shear, and bearing resistance, were used to compare predicted capacity with test results. The findings of the test program indicate that most simple connections can sustain significant amounts of tension in combination with design shear capacity.Key words: beam, connections, shear, tension, experimental, design, steel.Keywords
This publication has 5 references indexed in Scilit:
- Three-dimensional finite element analysis of double angle connections under tension and shearJournal of Constructional Steel Research, 2000
- Ultimate strength of fillet welded connections loaded in planeCanadian Journal of Civil Engineering, 1990
- Design of Single Plate Shear ConnectionsEngineering Journal, 1989
- Behavior of Bearing Critical Double-Angle Beam ConnectionsEngineering Journal, 1978
- Progressive CollapseCanadian Journal of Civil Engineering, 1975