A numerical study of flow characteristics in a helical pipe
Authors:
Open Access
- 19 July 2016
- journal article
- research article
- Published by SAGE Publications in Advances in Mechanical Engineering
- Vol. 8 (7)
Abstract
Flow characteristics and loss mechanism inside the helical pipe with large-caliber and large-scale Dean number were analyzed in this study. Numerical simulation was carried out for exploring velocity distribution, pressure field, and secondary flow by varying coil parameters such as Dean number, curvature radius, and coil pitch. The velocity gradient in the cross-section increases along the pipe and causes unsteady flow in the pipe. Large pressure differences in the 180° and 315° cross-section generate centrifugal forces on the pipe. The secondary flow is the major factor resulting in flow loss, presented obviously by the streamlines to analyze the effects of pipe parameters on the vortices. The vortex center shifts toward the upper wall with the increase in Dean number and takes a slight deflection with the increase in coil pitch. Meanwhile, a correlation of the flow loss extent inside the pipe as a function of friction factor was presented. The increases in curvature radius and coil pitch can diminish the friction factor to reduce flow losses. The accuracy of the numerical methodology was also validated by conducting corresponding experiments and empirical mathematical analysis. The maximum deviation between the experimental values and the simulated results of the pressure drop is just 2.9%.Keywords
This publication has 25 references indexed in Scilit:
- Evolution of turbulence characteristics from straight to curved pipesInternational Journal of Heat and Fluid Flow, 2013
- Friction losses of Newtonian and non-Newtonian fluids flowing in laminar regime in a helical coilExperimental Thermal and Fluid Science, 2012
- Experimental Study on Pressure Drop and Heat Transfer of Turbulent Flow in Tube in Tube Helical Heat ExchangerIndustrial & Engineering Chemistry Research, 2009
- Numerical Simulation of Subcooled Flow Boiling Heat Transfer in Helical TubesJournal of Pressure Vessel Technology, 2008
- Two-equation eddy-viscosity turbulence models for engineering applicationsAIAA Journal, 1994
- The Dean equations extended to a helical pipe flowJournal of Fluid Mechanics, 1989
- On the low-Reynolds-number flow in a helical pipeJournal of Fluid Mechanics, 1981
- Boundary vorticity method for laminar forced convection heat transfer in curved pipesInternational Journal of Heat and Mass Transfer, 1971
- A Study on the Hydraulic Loss of Tubular CoilsBulletin of JSME, 1971
- Secondary γ-rays produced by β-raysProceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character, 1911