Development of Geopolymer Mortars Using Air-Cooled Blast Furnace Slag and Biomass Bottom Ashes as Fine Aggregates
Open Access
Abstract
The aim of this study is to compare the mechanical and physical properties of different geopolymer mortars made with granulated blast furnace slag as a geopolymer source material, NaOH (8 M) as the activating solution, and three different types of fine aggregates (air-cooled blast furnace slag, biomass bottom ashes, and silica sand). The samples were made with an aggregate/geopolymer ratio of 3/1, and physical (density and mercury intrusion porosimetry), mechanical (compressive and flexural strength), and acid attack resistance were determined. When air-cooled blast furnace slag is used, the mechanical and acid attack properties are improved compared with silica sand and biomass bottom ashes because of the existence of amorphous phases in this slag, which increase the geopolymer reaction rate despite the particle size being higher than other aggregates. It can be highlighted that the use of ACBFS as a fine aggregate in geopolymer mortars produces better properties than in cement Portland mortar.Keywords
Funding Information
- Junta de Andalucia’s (Spain) Ministry of Development, Infrastructure, and Territory Planning (US.20-14, PID2019-110928RB-C33)
- Spanish National Plan 2017–2020 (US.20-14, PID2019-110928RB-C33)
This publication has 35 references indexed in Scilit:
- Mechanical performance of bedding mortars made with olive biomass bottom ashConstruction and Building Materials, 2016
- Use of bottom ash from olive pomace combustion in the production of eco-friendly fired clay bricksWaste Management, 2016
- Characterization of Olive Waste Ashes as Fertilizers2011
- Thermal insulating foamy geopolymers from perliteMinerals Engineering, 2010
- Development of Building Materials through Alkaline Activation of Construction and Demolition Waste (CDW) - Resistance to Acid AttackAdvances in Science and Technology, 2010
- New Blended Cement from Polishing and Glazing Ceramic SludgeInternational Journal of Applied Ceramic Technology, 2010
- Chemical stability of geopolymers containing municipal solid waste incinerator fly ashWaste Management, 2010
- Use of Biomass Gasification Fly Ash in Lightweight PlasterboardEnergy & Fuels, 2006
- Effect of Source Materials on GeopolymerizationIndustrial & Engineering Chemistry Research, 2003
- GeopolymersJournal of Thermal Analysis and Calorimetry, 1991