Preparation of a Phenolic-Resin-Based Polymer Sponge Composed of Intertwined Nanofibers with Tunable Wettability for High-Efficiency Separation of Oil–Water Emulsions
Authors:
- Xiying LiXLXiying Li
- Lei YouLYLei You
- Yufeng SongYSYufeng Song
- Li GaoLGLi Gao
- Yong LiuYLYong Liu
- Wei ChenWCWei Chen
- Liqun MaoLMLiqun Mao
- 23 October 2019
- journal article
- research article
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 35 (46) , 14902-14912
Abstract
Nowadays, as the combination of water pollution and water shortage causes severe environmental and social issues, the special wettable materials, which can be selectively wetted by either water or oil, attract tremendous attention for high-efficient separation of oil-water mixtures. Herein, we prepare a phenolic resin-based sponge composed of intertwined nanofibres via a simple hydrothermal method. The wettability of as-prepared polymer is readily tuned by only controlling the hydrothermal temperature. In the case of the hydrothermal temperature below 210 oC, the polymer sponge demonstrates superhydrophilic and under-water superoleophobic property, affording the separation of oil-in-water emulsion. However, as the hydrothermal temperature increases above 220 oC, the resulting bulk phenolic resin-based material becomes superhydrophobic and under-oil superhydrophobic, realizing a high filtration flux of 6147 L m-2 h-1 for the separation of water-in-oil emulsion driven by an external pressure of 40 kPa. This provides a feasible platform for future practical applications. The wettability transition depending on the hydrothermal temperature is discussed in terms of reaction mechanism. In addition, the stability and breakthrough pressure are also addressed from the viewpoints of thermodynamic and fluid mechanics, respectively.Keywords
Funding Information
- Education Department of Henan Province (17A430012)
- National Natural Science Foundation of China (21104016)
- Scientific and Technological Project of Henan Province (182102210240, 182300410205)
This publication has 68 references indexed in Scilit:
- Separation Mechanism and Construction of Surfaces with Special Wettability for Oil/Water SeparationACS Applied Materials & Interfaces, 2019
- Nanosecond Laser-Induced Underwater Superoleophobic and Underoil Superhydrophobic Mesh for Oil/Water SeparationLangmuir, 2018
- A review on special wettability textiles: theoretical models, fabrication technologies and multifunctional applicationsJournal of Materials Chemistry A, 2016
- Advanced Sorbents for Oil‐Spill Cleanup: Recent Advances and Future PerspectivesAdvanced Materials, 2016
- Recent advances in biomimetic thin membranes applied in emulsified oil/water separationJournal of Materials Chemistry A, 2016
- Robust Superhydrophobic Fabric Bag Filled with Polyurethane Sponges Used for Vacuum‐Assisted Continuous and Ultrafast Absorption and Collection of Oils from WaterAdvanced Materials Interfaces, 2016
- Superhydrophobic nanocoatings: from materials to fabrications and to applicationsNanoscale, 2015
- Thermo and pH Dual-Responsive Materials for Controllable Oil/Water SeparationACS Applied Materials & Interfaces, 2014
- Robust Superhydrophobic/Superoleophilic Sponge for Effective Continuous Absorption and Expulsion of Oil Pollutants from WaterACS Applied Materials & Interfaces, 2013
- Superhydrophobic Activated Carbon‐Coated Sponges for Separation and AbsorptionChemSusChem, 2013