Modification of Single-Walled Carbon Nanotube Networks Anodes for Application in Aqueous Lithium-Ion Batteries
Open Access
Abstract
The changes in global energy trends and the high demand for secondary power sources, have led to a renewed interest in aqueous lithium-ion batteries. The selection of a suitable anode for aqueous media is a difficult task because many anode materials have poor cycling performance due to side reactions with water or dissolved oxygen. An effective method for improving the characteristics of anodes in aqueous electrolyte solutions is adding carbon nanotubes (CNTs) to the electrode materials. For a better comprehension of the mechanism of energy accumulation and the reasons for the loss of capacity during the cycling of chemical current sources, it is necessary to understand the behaviour of the constituent components of the anodes. Although CNTs are well studied theoretically and experimentally, there is no information about their behaviour in aqueous solutions during the intercalation/deintercalation of lithium ions. This work reveals the mechanism of operation of untreated and annealed single-walled carbon nanotubes (SWCNT) anodes during the intercalation/deintercalation of Li+ from an aqueous 5 M LiNO3 electrolyte. The presence of -COOH groups on the surface of untreated SWCNTs is the reason for the low discharge capacity of the SWCNT anode in 5 M LiNO3 (3 mAh g−1 after 100 cycles). Their performance was improved by annealing in a hydrogen atmosphere, which selectively removed the -COOH groups and increased the discharge capacity of SWCNT by a factor of 10 (33 mAh g−1 after 100 cycles).Keywords
Funding Information
- European Regional Development Fund (1.1.1.1/19/A/139, 1.1.1.2/VIAA/4/20/694)
- European Regional Development Fund (1.1.1.1/19/A/139, 1.1.1.2/VIAA/4/20/694)
This publication has 60 references indexed in Scilit:
- Investigations of the Electrochemical Stability of Aqueous Electrolytes for Lithium Battery ApplicationsElectrochemical and Solid-State Letters, 2010
- Electrochemical properties of TiP2O7 and LiTi2(PO4)3 as anode material for lithium ion battery with aqueous solution electrolyteElectrochimica Acta, 2007
- On the thermal stability of LiPF6Thermochimica Acta, 2005
- Hydrolysis in the system LiPF6—propylene carbonate—dimethyl carbonate—H2OJournal of Fluorine Chemistry, 2005
- Decomposition of LiPF[sub 6] and Stability of PF[sub 5] in Li-Ion Battery ElectrolytesJournal of the Electrochemical Society, 2003
- LiPF6–EC–EMC electrolyte for Li-ion batteryJournal of Power Sources, 2002
- LiV3O8: characterization as anode material for an aqueous rechargeable Li-ion battery systemElectrochimica Acta, 2000
- Challenge in manufacturing electrolyte solutions for lithium and lithium ion batteries quality control and minimizing contamination levelJournal of Power Sources, 1999
- Electrochemical Lithium Intercalation in VO 2 ( B ) in Aqueous ElectrolytesJournal of the Electrochemical Society, 1996
- Lithium Intercalation from Aqueous SolutionsJournal of the Electrochemical Society, 1994