Phase holdups in three‐phase fluidized beds
Authors:
- 1 August 1987
- journal article
- research article
- Published by Wiley in AIChE Journal
- Vol. 33 (8) , 1359-1370
Abstract
The local bubble frequency, the local phase holdups and the local bed porosity in three‐phase fluidized beds were measured. Air, water, and 250 μm glass beads were used as the gas, liquid, and solid phases. The effects of gas and liquid velocities on phase holdups were studied. Time‐averaged local gas holdup and bubble frequency were measured by an optical fiber probe. Mass balances were performed at various axial positions along the fluidized beds to check the accuracy of the measurements.Keywords
This publication has 20 references indexed in Scilit:
- Fundamentals of gas‐liquid‐solid fluidizationAIChE Journal, 1985
- Bubble measurement in three‐phase fluidized beds using a u‐shaped optical fiberThe Canadian Journal of Chemical Engineering, 1984
- Three‐phase fluidization: Some knowledge gapsThe Canadian Journal of Chemical Engineering, 1981
- An electroconductivity technique for the measurement of axial variation of holdups in three‐phase fluidized bedsAIChE Journal, 1978
- Wake characteristics of three-phase fluidized bedsPowder Technology, 1977
- Calculation of expansion of three-phase fluidized bedChemistry and Technology of Fuels and Oils, 1977
- Phase holdup characteristics of three phase fluidized bedsThe Canadian Journal of Chemical Engineering, 1975
- Hold‐up and axial mixing characteristics of two and three phase fluidized bedsThe Canadian Journal of Chemical Engineering, 1972
- Bed expansion and bubble wakes in three‐phase fluidizationThe Canadian Journal of Chemical Engineering, 1970
- On bed porosity in gas—liquid fluidizationChemical Engineering Science, 1965