Navigation Error Characteristics of LIO-, VIO-, and RIMU-Assisted INS/GNSS Multi-Sensor Fusion Schemes in a GNSS-Denied Environment
Open Access
Abstract
Autonomous vehicles at level 3 and above must maintain high navigation accuracy, particularly in global navigation satellite system (GNSS)-denied environments. The main innovations of this work are threefold. First, we integrate visual inertial odometry (VIO) and light detection and ranging (LiDAR) inertial odometry (LIO) as external updates to mitigate the rapid drift of micro-electromechanical system (MEMS)-based industrial-grade inertial measurement units (IMUs) during long-term GNSS outages. Second, we adopt a redundant IMU (RIMU) approach that fuses multiple low-cost IMUs to reduce sensor noise and improve reliability. Third, we propose a system calibration methodology using both static and dynamic vehicle motion to estimate extrinsic parameters (boresight angles and lever arms) of the sensors, achieving an overall boresight angle root-mean-square error of 0.04 degrees in the simulation. Experiments were conducted under a 7 min GNSS-denied scenario in an underground parking lot, allowing for comparison of the error characteristics of multi-sensor fusion schemes against a navigation-grade reference. The INS/GNSS/LIO framework achieved a two-dimensional root-mean-square position error of 1.22 m (95% position error within 2.5 m), meeting the lane-level (1.5 m) accuracy requirement under a GNSS outage exceeding 7 min without prior maps. In contrast, the RINS/GNSS/VIO framework yielded a 4.71 m 2D mean position error under the same conditions. This paper provides a quantitative comparison of the baseline error characteristics of VIO-, LIO-, and RIMU-assisted INS/GNSS fusion under a GNSS-denied navigation scenario.Keywords
Funding Information
- National Science and Technology Council (NSTC), ROC (Taiwan) https://ror.org/02kv4zf79 (112-2218-E-006-016)
This publication has 37 references indexed in Scilit:
- Super Odometry: IMU-centric LiDAR-Visual-Inertial Estimator for Challenging Environments2021
- LION: Lidar-Inertial Observability-Aware Navigator for Vision-Denied Environments2021
- LIO-SAM: Tightly-coupled Lidar Inertial Odometry via Smoothing and Mapping2020
- LINS: A Lidar-Inertial State Estimator for Robust and Efficient Navigation2020
- LeGO-LOAM: Lightweight and Ground-Optimized Lidar Odometry and Mapping on Variable Terrain2018
- LIPS: LiDAR-Inertial 3D Plane SLAM2018
- Optimal redundant sensor configuration for accuracy increasing in space inertial navigation systemAerospace Science and Technology, 2015
- SVO: Fast semi-direct monocular visual odometry2014
- Parallel Tracking and Mapping for Small AR Workspaces2007
- A method for registration of 3-D shapesIEEE Transactions on Pattern Analysis and Machine Intelligence, 1992