Role of Plastic Behaviors of Ni3Sn4 Intermetallic Compound on Solder Joint Reliability
Authors:
- 9 November 2017
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Device and Materials Reliability
- Vol. 18 (1) , 18-26
Abstract
The study aims at investigating the influences of the elastoplastic behaviors of the micrometer-thick Ni 3 Sn 4 intermetallic compound (IMC) observed in the Cu/Ni/Sn3.5Ag solder joints of 3-D chip stacking package on the solder joint reliability under accelerated thermal cycling (ATC). The IMC's elastoplastic properties are characterized through the developed forward-reverse analysis algorithm, which integrates parametric finite element analysis (FEA) of instrumented indentation, dimensional analysis, and an experimental instrumented indentation test. The algorithm is first applied to characterize the elastoplastic behaviors of an electrodeposited Cu thin film, the results of which are compared with the known data, followed by a test on the thin Ni 3 Sn 4 IMC. The predicted elastoplastic properties are input to the ATC FEA model of the package to simulate the solder joint mechanical response, by which the corresponding fatigue life is assessed using a Coffin-Manson model. The simulation is validated against the experimental data. Besides, the prediction is compared with that without the plastic effect. Results show that despite bulk IMCs being normally elastic, brittle, and hard, the thin Ni 3 Sn 4 IMC possesses a highly ductile (plastic) and strain-hardening behavior. Moreover, taking the plastic behavior of the thin Ni 3 Sn 4 IMC into account helps improve the prediction of the solder joint fatigue life of the package.Keywords
Funding Information
- Ministry of Science and Technology (MOST), Taiwan (MOST 105-2221-E-007-004, MOST 104-2221-E-035-003-MY3)
This publication has 24 references indexed in Scilit:
- Heat dissipation assessment of through silicon via (TSV)-based 3D IC packaging for CMOS image sensingMicroelectronics Reliability, 2016
- Effect of Intermetallic Compounds on the Thermomechanical Fatigue Life of Three-Dimensional Integrated Circuit Package Microsolder Bumps: Finite Element Analysis and StudyJournal of Electronic Packaging, 2015
- Numerical analysis of thermo-mechanical and mobility effects for 28nm node and beyond: Comparison and design consequences over bumping technologiesMicroelectronics Reliability, 2014
- Drop Impact Reliability Analysis of 3-D Chip-on-Chip Packaging: Numerical Modeling and Experimental ValidationIEEE Transactions on Device and Materials Reliability, 2013
- Effect of intermetallic compounds on fracture behaviors of Sn3.0Ag0.5Cu lead-free solder joints during in situ tensile testJournal of Materials Science: Materials in Electronics, 2011
- Nanoindentation identifications of mechanical properties of Cu6Sn5, Cu3Sn, and Ni3Sn4 intermetallic compounds derived by diffusion couplesMaterials Science and Engineering: A, 2008
- Effect of Cu content on the mechanical reliability of Ni/Sn–3.5Ag systemJournal of Materials Research, 2007
- Deformation behavior of (Cu, Ag)–Sn intermetallics by nanoindentationActa Materialia, 2004
- Elastic properties, hardness, and indentation fracture toughness of intermetallics relevant to electronic packagingJournal of Materials Research, 2004
- Computational modeling of the forward and reverse problems in instrumented sharp indentationActa Materialia, 2001