Induction Motor Speed Estimation Based on Airgap Flux Measurement Using Hilbert Transform and Fast Fourier Transform
- 18 May 2022
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 22 (13) , 12690-12699
Abstract
This paper proposes the rotor speed estimation of a squirrel cage induction motor fed by a sinusoidal power supply or an inverter based on the use of a Hall effect sensor installed between two stator slots of the machine. As well known in literature, inverter-fed induction motors usually contains a series of current harmonics and in case of rotor faults, such as broken bars, this operational condition becomes even more severe. The speed estimation has been extensively investigated for its use in control schemes, to compute output power or machine efficiency and particularly for fault diagnosis using motor current signature analysis. In this method, it is necessary an accurate speed estimation to prevent false positives and false negative indications. Therefore, the present research has been carried out by applying the Fast Fourier Transform and Hilbert Transform in the airgap signal measured by the Hall sensor, in order to estimate the rotational speed of the induction motor in a healthy condition and with broken rotor bars. This approach has been compared to the same signal processing techniques using the stator current phase, usually used for speed estimation in the state of the art solutions. The efficiency of this approach was evaluated from simulation and experimental tests, for motor running at distinct load torques, at very low slip conditions and considering a damaged rotor cage. The simulation and experimental results have shown a better accuracy with the measured or simulated speeds, using the airgap estimations when compared to those obtained from stator current processing.Keywords
Funding Information
- São Paulo Research Foundation (2016/02525-1, 2018/05214-2)
- Nove de Julho University
This publication has 60 references indexed in Scilit:
- MRAS state estimator for speed sensorless ISFOC induction motor drives with Luenberger load torque estimationISA Transactions, 2016
- A Novel Technique for In Situ Efficiency Estimation of Three-Phase IM Operating With Unbalanced VoltagesIEEE Transactions on Industry Applications, 2016
- The Use of the Modified Prony’s Method for Rotor Speed Estimation in Squirrel-Cage Induction MotorsIEEE Transactions on Industry Applications, 2016
- Induction Motor Efficiency Evaluation Using a New Concept of Stator ResistanceIEEE Transactions on Instrumentation and Measurement, 2015
- Non‐intrusive induction motor speed detectionIET Electric Power Applications, 2015
- A Method for Measuring Torque of Squirrel-Cage Induction Motors Without Any Mechanical SensorIEEE Transactions on Instrumentation and Measurement, 2014
- Rotational Speed Measurement Using Single and Dual Electrostatic SensorsIEEE Sensors Journal, 2014
- Procedure for Determining Induction Motor Efficiency Working Under Distorted Grid VoltagesIEEE Transactions on Energy Conversion, 2014
- Spectral Analysis Using a Hall Effect Sensor for Diagnosing Broken Bars in Large Induction MotorsIEEE Transactions on Instrumentation and Measurement, 2014
- Sensorless Speed Measurement of Induction Motor Using Hilbert Transform and Interpolated Fast Fourier TransformIEEE Transactions on Instrumentation and Measurement, 2006