Characterization of high performance AIN nanoparticle-based transformer oil nanofluids
Authors:
- 14 November 2016
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 23 (5) , 2757-2767
Abstract
Well dispersed aluminium nitride(AlN) nanoparticles were synthesized by two-step ball milling coupled with surface coating. The AlN nanofluids (NFs) were prepared by dispersing as-prepared nanoparticles into transformer oil. The modified NFs is investigated as a new generation of transformer oil. The insulating properties have been investigated firstly. In the case of our AlN NFs with 0.079% < Φ < 0.159% (Φ means the volume concentration of AlN nanoparticles in the transformer oil), the positive lightning impulse breakdown voltage and partial discharge inception voltage (PDIV) increased around 50% and 20% compared to those of the transformer oil while alternating current (AC) breakdown voltage decreased around 20-30%. However, it can still meet the demand of the standard below 330 kV. The results show that AlN NFs have a concentration dependence of AlN nanoparticles. The amount of large particles increases with the increasing concentration of AlN nanoparticles while trap density of NFs increases first and then decreases, both of which have an opposite effect on the dielectric strength. Furthermore, the experimental results showed that the thermal conductivity is increased by 3-7% because of the addition of AlN nanoparticles.Keywords
This publication has 28 references indexed in Scilit:
- Properties of Mineral Oil based Silica NanofluidsIEEE Transactions on Dielectrics and Electrical Insulation, 2014
- Effect of semiconductive nanoparticles on insulating performances of transformer oilIEEE Transactions on Dielectrics and Electrical Insulation, 2012
- Effect of electron shallow trap on breakdown performance of transformer oil-based nanofluidsJournal of Applied Physics, 2011
- Thermal and insulating properties of epoxy/aluminum nitride composites used for thermal interface materialJournal of Applied Polymer Science, 2011
- Enhanced Thermal Conductivity of Polymer Matrix Composite via High Solids Loading of Aluminum Nitride in Epoxy ResinJournal of the American Ceramic Society, 2008
- Improved dispersion of aluminum nitride particles in epoxy resin by adsorption of two-layer surfactantsColloids and Surfaces A: Physicochemical and Engineering Aspects, 2008
- The influence of defects on the short-term breakdown characteristics and long-term dc performance of LDPE insulationIEEE Transactions on Dielectrics and Electrical Insulation, 2000
- The role of BaTiO/sub 3/ in modifying the dc breakdown strength of LDPEIEEE Transactions on Dielectrics and Electrical Insulation, 2000
- Increasing the thermal conductivity of boron nitride and aluminum nitride particle epoxy-matrix composites by particle surface treatmentsComposite Interfaces, 2000
- Chemical surface treatments of aluminium nitride powder suppressing its reactivity with waterJournal of Materials Science Letters, 1991