Conducting Polymers and Corrosion: Part 2 — Polyaniline on Aluminum Alloys
Authors:
- Y. PaeYPY. Pae
- 1 April 2000
- journal article
- Published by Association for Materials Protection and Performance (AMPP) in Corrosion
- Vol. 56 (4) , 401-410
Abstract
The electrochemical behavior of conducting polyaniline coatings on various aluminum alloys subjected to immersion in dilute Harrison solution (0.35% ammonium sulfate [(NH4)2SO4], 0.05% sodium chloride [NaCl]) was studied. Electrochemical impedance spectroscopy revealed that the charge-transfer resistance (Rct) of polyaniline-coated alloys increased as a function of immersion time. Polyaniline-coated platinum did not exhibit a significant increase in impedance under similar conditions, indicating that an active metal in contact with the polyaniline is required for the observed increase in Rct. A similar pattern of increasing Rct was observed for Alodine† (Product A)-treated Al 7075T-6 (UNS A97075) alloys. Mean current and mean potential values obtained from electrochemical noise measurements also suggest a substantial electrochemical interaction between the polyaniline and the aluminum alloy during the early stages of immersion. Polarization experiments and open-circuit potential measurements revealed an ennobling of aluminum alloys to higher potential in the presence of polyaniline coatings. The corrosion protection afforded by a polyaniline/epoxy two-coat system on Al 2024T-3 (UNS A92024) alloy also was evaluated using impedance spectroscopy and compared with that for a single coat of epoxy on untreated and Product A-treated Al 2024T-3 alloy. The Product A treatment and the polyaniline coating were found to increase the lifetime of the epoxy topcoat, although these two-coating systems exhibited rather different variations in low-frequency impedance with immersion time. A mechanism consistent with these observations was suggested.Keywords
This publication has 21 references indexed in Scilit:
- Corrosion protection of aluminum and aluminum alloys by polyanilines: A potentiodynamic and photoelectron spectroscopy studySynthetic Metals, 1999
- Synthesis, characterisation and ion transport studies on polypyrrole/polyvinylphosphate conducting polymer materialsSynthetic Metals, 1999
- Review of alternatives to chromate for corrosion protection of aluminum aerospace alloysProgress in Organic Coatings, 1998
- Corrosion protection using polyanujne coating formulationsSynthetic Metals, 1997
- Corrosion protection of iron/steel by emeraldine base polyaniline: an X-ray photoelectron spectroscopy studySynthetic Metals, 1997
- The use of electrochemical noise methods (ENM) to study thick, high impedance coatingsProgress in Organic Coatings, 1996
- Inhibition of corrosion of steels with the exploitation of conducting polymersSynthetic Metals, 1996
- Application of electrochemical impedance spectroscopy to study the degradation of polymer-coated metalsProgress in Organic Coatings, 1995
- Corrosion protection of mild steel by coatings containing polyanilineSynthetic Metals, 1995
- Electroactive Polymer Electrochemistry1994