An Accurate Torque Control Strategy for Permanent Magnet Synchronous Motors Based on a Multi-Closed-Loop Regulation Design
Open Access
Abstract
Torque control accuracy is a significant index of permanent magnet synchronous motors (PMSMs) and affects the safety of many applications greatly. Due to the strong nonlinearity of the motor as well as the disturbance of non-ideal factors such as temperature fluctuation and the parameter error in field-oriented control (FOC), it is undoubtedly difficult to accurately control the actual output torque. Meanwhile, the parameter differences between motors and sensors during mass production and the assembly process affect the consistency of output torque and even increase the factory failure rate of the motor. No torque sensor is implemented due to the cost and limited space. Accurate estimation of the motor torque becomes essential to realize the closed-loop feedback for torque and improve the accuracy at a lower cost. In this paper, a look-up table (LUT) model that can reflect the nonlinear mapping relationship between power and torque is established based on numerous offline experiments, which avoids the calculation of complex losses. A multi-closed-loop control strategy is proposed to dynamically adjust the amplitude and angle of the preset current command, respectively, to improve the torque accuracy. The effectiveness of the strategy has been validated by experimental results.Keywords
Funding Information
- Zhejiang Province Key R&D Program (2023C01132)
This publication has 41 references indexed in Scilit:
- A sliding mode speed and position observer for a surface-mounted PMSMISA Transactions, 2019
- Impacts of Permanent Magnet Synchronous Machine under Different Rotor Temperature2018
- Torque Analysis and Dynamic Performance Improvement of a PMSM for EVs by Skew Angle OptimizationIEEE Transactions on Applied Superconductivity, 2018
- Effect of Position Measurement Delay on the Performance of PMSM Drive2018
- Effects of Position Sensing Dynamics on Feedback Current Control of Permanent Magnet Synchronous Machines2018
- Initial Position Detection of PMSM2018
- A Torque Compensation Control Scheme of PMSM Considering Wide Variation of Permanent Magnet TemperatureIEEE Transactions on Magnetics, 2018
- Torque and Flux Ripples Minimization of Permanent Magnet Synchronous Motor by a Predictive-Based Hybrid Direct Torque ControlIEEE Journal of Emerging and Selected Topics in Power Electronics, 2018
- Current Sensorless MTPA Operation of Interior PMSM Drives for Vehicular ApplicationsIEEE Transactions on Vehicular Technology, 2018
- Direct torque control of PMSM using sliding mode backstepping control with extended state observerJournal of Vibration and Control, 2016