Improving indirect-drive ablator performance through pulse shaping and material selection in double shell implosions
Open Access
- 1 March 2026
- journal article
- Published by AIP Publishing in Physics of Plasmas
- Vol. 33 (3)
Abstract
The double shell path to inertially confined volumetric thermonuclear burn relies on efficient kinetic energy transfer from an outer ablator shell to an inner shell containing DT fuel at implosion velocities near 250 km/s. In order to experimentally realize adequate compression, target imperfections and assembly features must be tightly controlled. Pulse shape and ablator material are critical design choices that impact all aspects of the implosion. In this article, we evaluate three designs: an Al ablator with single-shock radiation drive, a CH ablator with single-shock drive, and a CH ablator with reduced-adiabat 2-shock drive. All designs use the same W inner (pusher) shell overcoated with a glow discharge polymer tamper and filled with liquid-density DT. One-dimensional HYDRA simulations revealed that the plastic ablator design required the use of the 2-shock drive to match the performance of the Al design. Two-dimensional simulations resolving broadband surface roughness up to modes of several hundred placed only on the ablator showed plastic to greatly outperform Al. The plastic ablator designs did exhibit higher levels of inner shell instability growth when surface roughness was only placed at the pusher/tamper interface, which was mitigated with higher foam cushion densities. A unique and additional benefit of a plastic ablator is also discussed, where heating of the ablator by Au M-band radiation is predicted to rapidly expand the hemi-shell surfaces, closing the equatorial joint gap ahead of the first shock. Taken together, the properties of the plastic ablator for indirect-drive double shell implosions appear promising in removing several long-standing fabrication challenges.Keywords
Funding Information
- National Nuclear Security Administration (89233218CNA000001)
This publication has 51 references indexed in Scilit:
- Advances in NLTE modeling for integrated simulationsHigh Energy Density Physics, 2010
- Multimode short-wavelength perturbation growth studies for the National Ignition Facility double-shell ignition target designsPhysics of Plasmas, 2004
- Laser-induced adiabat shaping by relaxation in inertial fusion implosionsPhysics of Plasmas, 2004
- Theory of laser-induced adiabat shaping in inertial fusion implosions: The decaying shockPhysics of Plasmas, 2003
- Improved performance of direct-drive inertial confinement fusion target designs with adiabat shaping using an intensity picketPhysics of Plasmas, 2003
- Modified Bell–Plesset effect with compressibility: Application to double-shell ignition target designsPhysics of Plasmas, 2003
- Indirect-drive noncryogenic double-shell ignition targets for the National Ignition Facility: Design and analysisPhysics of Plasmas, 2002
- Cretin—a radiative transfer capability for laboratory plasmasJournal of Quantitative Spectroscopy and Radiative Transfer, 2001
- A nonlocal electron conduction model for multidimensional radiation hydrodynamics codesPhysics of Plasmas, 2000
- Taylor instability in shock acceleration of compressible fluidsCommunications on Pure and Applied Mathematics, 1960