Properties of hydrogen absorption by nano-structured FeTi alloys
Authors:
- 1 May 2008
- journal article
- Published by Walter de Gruyter GmbH in International Journal of Materials Research
- Vol. 99 (5) , 507-512
Abstract
In this study, two different nano-structured samples of the FeTi compound were prepared by mechanical alloying and mechanical grinding. For these samples, kinetics of the initial rate of hydrogen absorption, and the equilibrium hydrogen pressure as a function of hydrogen concentration were measured. Mechanical alloying of Fe and Ti atoms produced the FeTi compound powder samples with microstructures of a mixture of nano-structured FeTi grains and amorphous phases. This sample exhibited a high initial rate of hydrogen absorption even at 298 K, however, a strongly reduced hydrogen storage capacity. Mechanical grinding of the FeTi produced samples of particles with a particular microstructure: surface layers with a mixture of nano-structured FeTi grains and amorphous phases, and a single crystalline phase of FeTi below the surface layers for each particle. This sample exhibited a high initial rate of hydrogen absorption without a significant reduction of the hydrogen storage capacity compared with that of the standard FeTi sample. This mechanical grinding treatment was found to be an effective method of surface modification to improve the initial activation of the FeTi hydrogen storage alloy.Keywords
This publication has 21 references indexed in Scilit:
- Microstructure and hydrogen absorption–desorption properties of Mg–TiFe0.92Mn0.08 composites prepared by wet mechanical millingJournal of Alloys and Compounds, 2004
- The electronic and electrochemical properties of the TiFe-based alloysJournal of Alloys and Compounds, 2003
- Investigation on synthesis, characterization and hydrogenation behaviour of hydrogen storage material: Fe1−xZrxTi1.3 (x = 0.2)International Journal of Hydrogen Energy, 1999
- Improved hydrogen sorption characteristics in FeTi1 + xMm materialInternational Journal of Hydrogen Energy, 1996
- Hydriding Characteristics of FeTi-Based Ti-Fe-V-Mn Alloy*Zeitschrift für Physikalische Chemie, 1993
- Thermal Desorption of Hydrogen from FeTi1.14O0.03*Zeitschrift für Physikalische Chemie, 1989
- Hydrogen absorption and desorption properties of FeTi1.14O0.03 in impure hydrogen containing CO, CO2 and oxygenJournal of the Less Common Metals, 1985
- Some observations on activation of FeTi for hydrogen absorptionJournal of the Less Common Metals, 1983
- Surface poisoning of LaNi5, FeTi and (Fe,Mn)Ti by O2, Co and H2OJournal of the Less Common Metals, 1980
- Formation and properties of iron titanium hydrideInorganic Chemistry, 1974