Pressure and Rate Analysis of Fractured Low Permeability Gas Reservoirs: Numerical and Analytical Dual-Porosity Models
Authors:
- 28 January 2013
- conference paper
- Published by Society of Petroleum Engineers (SPE)
Abstract
Most oil and gas production comes from heterogeneous, fractured reservoirs. These fractures can be naturally induced or generated / re-activated through completion and stimulation techniques. In fractured reservoirs, the fluid flow is governed by both fracture and matrix rock-fluid characteristics. Hence, modeling of fractured reservoirs need special considerations to account for these rock-fluid interactions in the matrix and fractures. Currently used formulations of dual-porosity models give a good understanding of heterogeneous fractured reservoir systems. However, determining reservoir properties like effective permeability and estimating the pore-volume or reserves of fractured reservoirs (especially for tight formations) are some of the technical challenges related to reservoir characterization. In industry, similar reservoir properties can be estimated using prolonged rate or bottomhole pressure controlled drawdown analysis. In this study, numerical dual-porosity models have been implemented and studied for a range of parameters. Grid geometry (radial / linear), type of well (vertical / horizontal), formation tightness (matrix permeability), mode of control (constant flowing pressure / constant flowing rate), and connectivity of fractures (connected and disconnected fracture-continuum) are among the cases investigated to capture the transient behavior of fractured tight gas formations using a numerical dual-porosity model. In addition, for the linear, flow rate controlled case, numerical and analytical model results are compared with good matches. Fracture and matrix permeability, effective permeability, fracture conductivity, fracture and matrix storativity, and radius of investigation are among the reservoir parameters inferred / calculated from simulation results using the numerical model. Inferred results match the input values to an acceptable degree of accuracy. Hence, it can be concluded that numerical dual-porosity model is a very good tool to analyze transient response of tight formations.Keywords
This publication has 8 references indexed in Scilit:
- Physics and Modeling of Gas Flow in Shale Reservoirs2012
- Analyzing Production Data From Unconventional Gas Reservoirs With Linear Flow and Apparent SkinJournal of Canadian Petroleum Technology, 2012
- A Critical Review for Proper Use of Water/Oil/Gas Transfer Functions in Dual-Porosity Naturally Fractured Reservoirs—Part I2007
- Analytical and Numerical Solution of Oil Recovery From Fractured Reservoirs With Empirical Transfer FunctionsSPE Reservoir Engineering, 1992
- Unsteady Flow to a Well Produced at a Constant Pressure in a Fractured ReservoirSPE Formation Evaluation, 1987
- Algorithm 368: Numerical inversion of Laplace transforms [D5]Communications of the ACM, 1970
- Pressure Transient Analysis of Naturally Fractured Reservoirs with Uniform Fracture DistributionSociety of Petroleum Engineers Journal, 1969
- Basic concepts in the theory of seepage of homogeneous liquids in fissured rocks [strata]Journal of Applied Mathematics and Mechanics, 1960