Possibility of material cost reduction toward development of low-cost second-generation superconducting wires
Authors:
- 15 September 2017
- journal article
- research article
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 56 (10) , 103101
Abstract
Two approaches to reducing the material cost of second-generation superconducting wires are proposed in this paper: (1) instead of the electrical stabilizing layers of silver and copper presently used on the superconducting layer, a Nb-doped SrTiO 3 conductive buffer layer and cube-textured Cu are proposed as an advanced architecture, and (2) the use of an electromagnetic (EM) steel tape as a metal substrate of coated conductors in a conventional architecture. In structures fabricated without using electrical stabilizing layers on the superconducting layer, the critical current density achieved at 77 K in a self-field was approximately 2.6 MA/cm 2 . On the other hand, in the case of using EM steel tapes, although the critical current density was far from practical at the current stage, the biaxial alignment of YBa 2 Cu 3 O y (YBCO) and buffer layers was realized without oxidation on the metal surface. In this study, the possibility of material cost reduction has been strongly indicated toward the development of low-cost second-generation superconducting wires in the near future.Keywords
This publication has 18 references indexed in Scilit:
- Customised 2G HTS wire for applicationsSuperconductor Science and Technology, 2015
- Chemical solution derived YBa2Cu3.3O7-δ/Y2O3(CuO) multilayers on oxide buffered metallic tapes2015
- Development Status of AMSC Amperium®WireJournal of Physics: Conference Series, 2014
- Characteristics of High-$J_{c}$ GdBCO Coated Conductors Fabricated by the RCE-DR ProcessIEEE Transactions on Applied Superconductivity, 2012
- 2G HTS Coil Technology Development at SuperPowerIEEE Transactions on Applied Superconductivity, 2012
- Study on the High Temperature Pressure Charging Procedure of Bi-2223/Ag Superconducting TapesIEEE Transactions on Applied Superconductivity, 2010
- Long length coated conductor fabrication by inclined substrate deposition and evaporationJournal of Physics: Conference Series, 2006
- Iridium: An Oxygen Diffusion Barrier and a Conductive Seed Layer for RABiTS-Based Coated ConductorsIEEE Transactions on Applied Superconductivity, 2005
- Electrical and magnetic properties of conductive Cu-based coated conductorsApplied Physics Letters, 2003
- Possible highT c superconductivity in the Ba?La?Cu?O systemZeitschrift für Physik B Condensed Matter, 1986