Effect of triangular perforated flat cone-shaped inserts on performance of double-tube heat exchanger
Open Access
- 1 November 2023
- journal article
- research article
- Published by AIP Publishing in Physics of Fluids
- Vol. 35 (11)
Abstract
This study investigated the effect of triangular perforations with flat conical inserts in a double-tube heat exchanger. Triangular perforations with flat cone-shaped inserts were placed inside the inner tube to enhance the heat transfer coefficient. The experiments were conducted for a number of flat conical strips (m) and pitch ratios (P = p/di) for flows varying from Re = 3000 to 9000 at a constant attack angle (α = 20°). The results showed that a triangular perforation with flat cone-shaped inserts remarkably increases the heat transfer factor, in contrast to flat conical inserts. The rise in the coefficient of heat was attributed to the creation of turbulence and disturbance of the boundary layer caused by perforated inserts. Furthermore, it was observed that the heat transfer coefficient increased with the Reynolds number, indicating that the effect of the inserts was more significant at higher fluid velocities. Correlations were developed to compare and analyze the results of the Nusselt number and friction factor. The developed correlation results are in good agreement with the experimental results. The findings obtained from this study can be implemented to enhance the performance and optimize the design parameters of industrial heat exchangers.Keywords
Funding Information
- Karnataka State Council for Science and Technology, Indian Institute of Science (46S_BE_1844)
- Vision Group on Science and Technology (476)
This publication has 37 references indexed in Scilit:
- Numerical studies on heat transfer and flow characteristics for laminar flow in a tube with multiple regularly spaced twisted tapesInternational Journal of Thermal Sciences, 2012
- A numerical study on thermo-hydraulic characteristics of turbulent flow in a circular tube fitted with conical strip insertsApplied Thermal Engineering, 2011
- Development and evaluation of enhanced heat transfer tubesApplied Thermal Engineering, 2011
- A numerical study on heat transfer and friction factor characteristics of laminar flow in a circular tube fitted with center-cleared twisted tapeInternational Journal of Thermal Sciences, 2011
- Heat transfer in counterflow heat exchangers with helical turbulatorsCommunications in Nonlinear Science and Numerical Simulation, 2010
- Heat transfer and friction factor correlations for a solar air heater duct roughened artificially with multiple v-ribsSolar Energy, 2010
- Enhancing heat transfer in the core flow by using porous medium insert in a tubeInternational Journal of Heat and Mass Transfer, 2010
- Heat transfer behaviors in round tube with conical ring insertsEnergy Conversion and Management, 2008
- Heat transfer and friction factor correlation for artificially roughened duct with metal grit ribsInternational Journal of Heat and Mass Transfer, 2007
- Effect of twisted strips on heat transfer and pressure drop in heat exchangersEnergy Conversion and Management, 1998