A 92.1-dB SNDR Easy-Driving Two-Step NS-SAR-Based Incremental ADC With Concurrent Gain-Error Plus Noise Suppression
- 4 December 2025
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 61 (3) , 884-897
Abstract
This article presents a two-step incremental analog-to-digital converter (ADC) that achieves high resolution and energy efficiency while substantially easing the input driving constraints and interstage gain variation. By employing a level-shifted sub-ranging architecture with an input-tracking (IT) feature, the design obviates direct input sampling, thereby significantly relaxing the demands on the input driver. A gain-error-and-noise suppression (GENS) technique further enhances robustness to interstage gain variation through compact and hardware-efficient switched-capacitor (SC) operations. The prototype ADC fabricated in a 65-nm CMOS achieves a 92.1-dB signal-to-noise-and-distortion ratio (SNDR) over a 50-kHz bandwidth. With fully dynamic operation, the power consumption is only $44.8~{\mu }$ W, resulting in a Schreier figure-of-merit (FoM) of 182.6 dB. The proposed ADC demonstrates competitive performance for low-power, high-precision, and multiplexable sensing in wearable, implantable, and edge AI applications.Keywords
Funding Information
- National Science Foundation (2133106)
- National Science Foundation (2239033)
This publication has 39 references indexed in Scilit:
- A 133.6-µW 1kHz-BW Multi-Bit 2nd-Order Incremental ADC Achieving 115.4-dB SNDR with Low-Cost Coarse-Sorting DEM and Zip-Extended-Counting2025
- A 50-kHz BW 92.1-dB SNDR Incremental ADC Using a Back-End Sampling Two-Step NS-SAR Architecture with Concurrent Gain-Error + Noise Suppression2025
- A 20-bit SAR-Assisted Extended Counting Incremental ADC With a Clock-Controlled PGA BufferIEEE Access, 2025
- A 77.1-dB 6.25-MHz-BW Pipeline SAR ADC with Enhanced Interstage Gain Error Shaping and Quantization Error Shaping2020
- A 2MHz BW Buffer-Embedded Noise-Shaping SAR ADC Achieving 73.8dB SNDR and 87.3dB SFDR2019
- An 11.0 bit ENOB, 9.8 fJ/conv.-step noise-shaping SAR ADC calibrated by least squares estimation2017
- 11.2 A 0.85fJ/conversion-step 10b 200kS/s subranging SAR ADC in 40nm CMOS2014
- A 90MS/s 11MHz bandwidth 62dB SNDR noise-shaping SAR ADC2012
- A 12 b 75 MS/s pipelined ADC using open-loop residue amplification2003
- Circuit techniques for reducing the effects of op-amp imperfections: autozeroing, correlated double sampling, and chopper stabilizationProceedings of the IEEE, 1996