DYNAMIC PRESSURE RISE IN THE DRYING CHAMBER AS A REMOTE SENSING METHOD FOR MONITORING THE TEMPERATURE OF THE PRODUCT DURING THE PRIMARY DRYING STAGE OF FREEZE DRYING
Authors:
- 1 January 1998
- journal article
- research article
- Published by Taylor & Francis in Drying Technology
- Vol. 16 (6) , 1153-1171
Abstract
A novel dynamic pressure rise method is developed as a remote sensing procedure for determining at different times during the primary drying stage of the freeze drying process (i) the temperature of the moving interface between the dried and frozen layers of the product, (ii) temperature close to the upper surface of the dried layer of the product, (iii) the temperature of the bottom surface of the frozen layer of the product, and (iv) the temperature profile of the frozen layer of the product. Furthermore, by knowing the temperature of the heating plate and determining the value of the temperature of the moving interface from the dynamic pressure rise method, the value of the position of the moving interface could be determined by an expression presented in this workKeywords
This publication has 11 references indexed in Scilit:
- OPTIMAL CONTROL OF THE PRIMARY AND SECONDARY DRYING STAGES OF BULK SOLUTION FREEZE DRYING IN TRAYSDrying Technology, 1998
- Mathematical Modelling of the Primary and Secondary Drying Stages of Bulk Solution Freeze-Drying in Trays: Parameter Estimation and Model Discrimination by Comparison of Theoretical Results With Experimental DataDrying Technology, 1997
- Research and Development Needs and Opportunities in Freeze DryingDrying Technology, 1996
- Freeze-Drying of Pharmaceutical Crystalline and Amorphous Solutes in Vials: Dynamic Multi-Dimensional Models of the Primary and Secondary Drying Stages and Qualitative Features of the Moving InterfaceDrying Technology, 1995
- A theory for the primary and secondary drying stages of the freeze-drying of pharmaceutical crystalline and amorphous solutes: comparison between experimental data and theorySeparations Technology, 1994
- DUSTY-GAS PARAMETERS OF ACTIVATED CARBON ABSORBENT PARTICLESChemical Engineering Communications, 1987
- An analysis of the lyophilization process using a sorption‐sublimation model and various operational policiesAIChE Journal, 1985
- Optimal control of a freeze Dryer—IIChemical Engineering Science, 1982
- Optimal control of a freeze dryer—I Theoretical development and quasi steady state analysisChemical Engineering Science, 1979
- An adsorption-sublimation model for a freeze dryerChemical Engineering Science, 1979