Micro- and nano-morphological modification of aluminum surface for adhesive bonding to polymeric composites
- 2 January 2013
- journal article
- research article
- Published by Taylor & Francis in Journal of Adhesion Science and Technology
- Vol. 27 (15) , 1625-1640
Abstract
The aim of the present study is to demonstrate the effect of micro and nanomorphological modifications of aluminum surface on adhesion strength. While former studies have investigated surface morphological changes after employing various surface treatment methods, this study proposes a micropatterning method to provide designed surface topography for adhesion strength enhancement. An oxalic acid-based anodizing process was also applied after micro-scale patterning on aluminum surface to incorporate nanopores into the micropatterned surface topography. The adhesion strength of an aluminum/composite bond was assessed in terms of interfacial fracture toughness under various mixed-mode loading conditions using a single-leg bending test. Microscale periodic grooves incorporated with nanoporous surface morphology significantly improved the adhesion strength. Although bond strength enhancement can be attained in any mixed mode loading condition, the surface topography modification technique is more effective in sliding mode dominant loadings than in opening-mode dominant loadings. The bond strength improvement is explained by the increased implementation of mechanical interlock mechanism which increases the resistance for crack growth by altering the trajectory of crack propagation from the bi-material interface toward the polymeric composite.Keywords
This publication has 18 references indexed in Scilit:
- Effects of roughness on interfacial performances of silica glass and non-polar polyarylacetylene resin compositesApplied Surface Science, 2007
- Surface energy, surface topography and adhesionInternational Journal of Adhesion and Adhesives, 2003
- Adhesion to Sintered SubstratesThe Journal of Adhesion, 1996
- Ordered Metal Nanohole Arrays Made by a Two-Step Replication of Honeycomb Structures of Anodic AluminaScience, 1995
- The mixed-mode delamination of fibre composite materialsComposites Science and Technology, 1993
- The enhancement of adhesive joint strength by extending the surface of anodized aluminiumInternational Journal of Adhesion and Adhesives, 1992
- Model Studies of the Effect of Surface Roughness and Mechanical Interlocking on AdhesionThe Journal of Adhesion, 1990
- Oxide treatments of Al 2024 for adhesive bonding- surface characterizationApplied Surface Science, 1987
- Oxide morphologies on aluminum prepared for adhesive bondingApplications of Surface Science, 1979
- Nucleation and growth of porous anodic films on aluminiumNature, 1978