Wood flour and hazelnut shells polylactide‐based biocomposites for packaging applications: Characterization, photo‐oxidation, and compost burial degradation
Authors:
Open Access
- 10 April 2024
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 45 (11) , 9802-9818
Abstract
In this work, polylactide (PLA) was loaded with wood flour (WF) or hazelnut shells (HSs) (10% and 20% of fillers). The matrix and biocomposites were fully characterized from a mechanical and rheological point of view to test their processability and mechanical performance. Compost burial degradation test (30 days), with or without a prior photo‐oxidation step, assessed their biodegradability after an outdoor application, and was monitored by weight loss (WL). The viscosity of the biocomposites was lower than that of the matrix and this unusual result can be attributed to a limited adhesion between the PLA and fillers. Both fillers increased the elastic modulus but decreased the tensile strength and elongation at break. As for the weathering, the degradation of PLA was mostly due to hydrolytic chain scission due to the presence of humidity. Resistance of PLA to UV irradiation improved in presence of both the two fillers. Their lignocellulosic nature was responsible for this behavior. Both fillers induced a high resistance and lower degradation in compost: WL percentages of virgin PLA was about 26%, biocomposites with 20% of WF or HS showed WL of about 10% and 14%, respectively. Photo‐oxidation (36 h with condensation cycle) increased the compost degradation rate of both biocomposites and WL of PLA with 20% of WF or HS were about 15% and 21%, respectively, after 30 days. Highlights: Poor adhesion between the matrix and fillers reduced the biocomposites viscosity. Fillers increased the elastic modulus but decreased the properties at break. Both fillers improved the resistance of PLA to UV irradiation. Biocomposites showed a lower susceptibility to compost degradation than PLA. Photo‐oxidation increased the compost degradation rate of biocomposites.Keywords
This publication has 42 references indexed in Scilit:
- Incorporation of olive pomace as a natural filler in to the PA6 matrix: Effect on the structure and thermal properties of synthetic Polyamide 6Chemical Engineering Journal Advances, 2022
- Opuntia Ficus Indica based green composites for NPK fertilizer controlled release produced by compression molding and fused deposition modelingComposites Part A: Applied Science and Manufacturing, 2022
- Demonstrating an ideal compostable plastic using biodegradability kinetics of poly(lactic acid) (PLA) based green biocomposite films under aerobic composting conditionsEnvironmental Challenges, 2021
- Study of the soil burial degradation of some PLA/CS biocompositesComposites Part B: Engineering, 2018
- “True” biocomposites with biopolyesters and date seed powder: Mechanical, thermal, and degradation propertiesJournal of Applied Polymer Science, 2014
- Polypropylene composites with natural fibers and wood – General mechanical property profilesComposites Science and Technology, 2012
- Properties of biocomposites based on lignocellulosic fillersCarbohydrate Polymers, 2006
- Thermal degradation and biodegradability of poly (lactic acid)/corn starch biocompositesJournal of Applied Polymer Science, 2006
- Biodegradability and mechanical properties of agro‐flour–filled polybutylene succinate biocompositesJournal of Applied Polymer Science, 2005
- Biocomposites based on plasticized starch: thermal and mechanical behavioursCarbohydrate Polymers, 2004