Rake Angle Effect on a Machined Surface in Orthogonal Cutting of Graphite/Polymer Composites
Open Access
- 1 January 2018
- journal article
- research article
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2018 (1)
Abstract
Graphite and its composites have been widely used in various industrial fields. It has been generally accepted that, for positive rake angles, there is a significant increase in tension stress at the cutting zone during the machining of brittle materials, and cracks occur and spread easily, degrading the quality of the machined surface quality. However, it is found in this study that positive rake angles can improve the machined surface finish during the orthogonal cutting of graphite/polymer composites. Better machined surface finish is obtained for a larger rake angle. A finite element model is developed to reveal the mechanism of influence of the positive rake angle on the machined surface. Based on the effective stress field obtained from finite element analysis, it can be predicted that the crack initiates at the tool tip, subsequently propagates downward and forward, and later spreads gradually toward the free surface of the workpiece. A larger rake angle can promote crack propagation far from the machined surface. The crack initiation and propagation laws are validated by the edge‐indentation experiments. In addition, the cutting force at various rake angles is investigated.Keywords
Funding Information
- National Natural Science Foundation of China (51775198)
- Guangzhou Municipal Science and Technology Program key projects (201804010182)
This publication has 27 references indexed in Scilit:
- Evaluation of boron-doped-microcrystalline/nanocrystalline diamond composite coatings in drilling of CFRPSurface and Coatings Technology, 2017
- PCM based heat sinks of paraffin/nanoplatelet graphite composite for thermal management of IGBTApplied Thermal Engineering, 2017
- Deformation of thin graphite electrodes with high aspect ratio during sinking electrical discharge machiningCIRP Annals, 2017
- Development of ultralight and thin bipolar plates using epoxy-carbon fiber prepregs and graphite compositesInternational Journal of Hydrogen Energy, 2017
- Mechanism of material removal during orthogonal cutting of graphite/polymer compositesThe International Journal of Advanced Manufacturing Technology, 2015
- Influence of the material removal mechanisms on hole integrity in ultrasonic machining of structural ceramicsUltrasonics, 2012
- A study of drilling uni-directional carbon/epoxy compositesInternational Journal of Abrasive Technology, 2011
- Cutting performance of time-modulated chemical vapour deposited diamond coated tool inserts during machining graphiteDiamond and Related Materials, 2006
- Bio-compatibility of the surface layer of pyrolytic graphiteThin Solid Films, 2003
- The machinability of sintered carbons based on the correlation between tool wear rate and physical and mechanical propertiesWear, 1996