Processing of glass former alloys by spray forming
- 22 July 2010
- journal article
- research article
- Published by Wiley in Materialwissenschaft und Werkstofftechnik
- Vol. 41 (7) , 513-523
Abstract
Spray forming (SF) can be classified as a two‐stage manufacturing process in which solidification begins during particle flight, a relatively rapid solidification step that ends as the deposit builds up, with the remaining liquid droplets solidifying at considerably slower rates. Due to the high cooling rate of the atomization step and the special conditions of deposit buildup, with incoming materials dynamically refining the solidifying material, as‐sprayed deposits typically display a fine‐scale microstructure which may also exhibit some extended solid solubility and metastable phases. Our group has studied several alloys in order to investigate the potential formation of novel microstructures by this process. This paper describes some of the results obtained by spray forming of aluminum‐ and iron‐based alloys, whose compositions derive from rapid solidification studies aimed at obtaining amorphous structures. Al85Y8Ni5Co2, Fe83Zr3.5Nb3.5B9Cu1, [(Fe0.6Co0.4)0.75B0.2Si0.05]96Nb4, and Fe63Nb10Al4Si3B20 glass‐forming alloys were processed. Formation of amorphous phase was observed throughout the deposit of the Al‐based alloy processed at a high G/M ratio, which was not observed in the Fe‐based alloys. In addition, the [(Fe0.6Co0.4)0.75B0.2Si0.05]96Nb4 alloy, which displayed the highest glass‐forming ability among the Fe‐based alloys, showed a high volume percent of amorphous phase formation up to 4mm thickness of the deposit, a similar value obtained for this alloy when processed by copper mold casting.Keywords
This publication has 24 references indexed in Scilit:
- Super-high strength of over 4000 MPa for Fe-based bulk glassy alloys in [(Fe1−xCox)0.75B0.2Si0.05]96Nb4 systemActa Materialia, 2004
- Microstructural Characterization of Spray Formed A380 AlloyJournal of Metastable and Nanocrystalline Materials, 2004
- Microstructures of Rapidly Solidified Al-9Si-3Cu AlloyJournal of Metastable and Nanocrystalline Materials, 2003
- Soft Magnetic Bulk Glassy Fe-B-Si-Nb Alloys with High Saturation Magnetization above 1.5 TMATERIALS TRANSACTIONS, 2002
- Amorphous phase formation in spray deposited AlYNiCo and AlYNiCoZr alloysScripta Materialia, 2001
- Nanocrystalline aluminum bulk alloys with a high strength of 1420 MPa produced by the consolidation of amorphous powdersScripta Materialia, 2001
- Amorphous and nanocrystalline materials for applications as soft magnetsProgress in Materials Science, 1999
- Bulk Glass-Forming Metallic Alloys: Science and Technology [1998 Mrs Medal Award Lecture, Presented at Symposium Mm]MRS Proceedings, 1998
- An amorphous core transformer: design and experimental performanceMaterials Science and Engineering: A, 1997
- Non-crystalline Structure in Solidified Gold–Silicon AlloysNature, 1960