Pinning in $\hbox{MgB}_{2}$- and YBaCuO-Based Superconductors: Effect of Manufacturing Pressure and Temperature
- 4 January 2013
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 23 (3) , 8001605
Abstract
Bulk MgB 2 - and YBaCuO-based materials are competitive candidates for applications. The properties of both compounds can be significantly improved by high temperature-high pressure preparation methods. The transformation of grain boundary pinning to point pinning in MgB 2 -based materials with increasing manufacturing temperature from 800 to 1050 ° C under pressures from 0.1 MPa to 2 GPa correlates well with an increase in critical current density in low and intermediate magnetic fields and with the redistribution of boron and oxygen in the material structure. As the manufacturing temperature increases (to 2 GPa), the discontinuous oxygen-enriched layers transform into distinct Mg-B-O inclusions, and the size and amount of inclusions of higher borides MgB X (X>;2) are reduced. The effect of oxygen and boron redistribution can be enhanced by Ti or SiC addition. The oxygenation of melt-textured YBa 2 Cu 3 O 7 - δ (MT-YBaCuO) under oxygen pressure (16 MPa) allows one to increase the oxygenation temperature from 440°C to 700-800°C, which leads to an increase of the twin density in the Y123 matrix and to a decrease of dislocations, stacking faults, and the density of microcracks, and as a result, to an increase of the critical current density, J c , and the trapped magnetic field. In MT-YBaCuO, practically free form dislocations and stacking faults and with a twin density of 22-35 μm -1 , J c of 100 kA/cm 2 (at 77 K, 0 T) has been achieved, and the importance of twins in Y123 for pinning was demonstrated experimentally.Keywords
This publication has 28 references indexed in Scilit:
- Effect of higher borides and inhomogeneity of oxygen distribution on critical current density of undoped and doped magnesium diborideJournal of Physics: Conference Series, 2010
- Quantitative electron microscopy and spectroscopy of MgB2wires and tapesSuperconductor Science and Technology, 2008
- Calculation of the volume pinning force insuperconductorsPhysical Review B, 2008
- Mechanism of Enhancement in Electromagnetic Properties ofby Nano SiC DopingPhysical Review Letters, 2007
- Fabrication and characterization of thin-wall YBCO single-domain samplesSuperconductor Science and Technology, 2006
- Increased efficiency of batch-processed melt-textured YBCOSuperconductor Science and Technology, 2005
- Structure and properties of melt-textured YBa2Cu3O7 , high pressure–high temperature treated and oxygenated under evaluated oxygen pressureSuperconductor Science and Technology, 2004
- Microstructural influence on critical currents and irreversibility line in melt-textured reannealed at high oxygen pressurePhysical Review B, 2002
- Progress in melt texturing of YBa2Cu3OxsuperconductorSuperconductor Science and Technology, 1994
- Crystal growth of HTSC materialsSuperconductor Science and Technology, 1993