Bathymetric Survey of the St. Anthony Channel (Croatia) Using Multibeam Echosounders (MBES)—A New Methodological Semi-Automatic Approach of Point Cloud Post-Processing
Open Access
- 13 January 2022
- journal article
- research article
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 10 (1) , 101
Abstract
Multibeam echosounders (MBES) have become a valuable tool for underwater floor mapping. However, MBES data are often loaded with different measurement errors. This study presents a new user-friendly and methodological semi-automatic approach of point cloud post-processing error removal. The St. Anthony Channel (Croatia) was selected as the research area because it is regarded as one of the most demanding sea or river passages in the world and it is protected as a significant landscape by the Šibenik-Knin County. The two main objectives of this study, conducted within the Interreg Italy–Croatia PEPSEA project, were to: (a) propose a methodological framework that would enable the easier and user-friendly identification and removal of the errors in MBES data; (b) create a high-resolution integral model (MBES and UAV data) of the St. Anthony Channel for maritime safety and tourism promotion purposes. A hydrographic survey of the channel was carried out using WASSP S3 MBES while UAV photogrammetry was performed using Matrice 210 RTK V2. The proposed semi-automatic post-processing of the MBES acquired point cloud was completed in the Open Source CloudCompare software following five steps in which various point filtering methods were used. The reduction percentage in points after the denoising process was 14.11%. Our results provided: (a) a new user-friendly methodological framework for MBES point filtering; (b) a detailed bathymetric map of the St. Anthony Channel with a spatial resolution of 50 cm; and (c) the first integral (MBES and UAV) high-resolution model of the St. Anthony Channel. The generated models can primarily be used for maritime safety and tourism promotion purposes. In future research, ground-truthing methods (e.g., ROVs) will be used to validate the generated models.Keywords
This publication has 67 references indexed in Scilit:
- A novel method for archiving multibeam sonar data with emphasis on efficient record size reduction and storagePolish Maritime Research, 2013
- The filtering and compressing of outer beams to multibeam bathymetric dataMarine Geophysical Research, 2012
- The Use of Bathymetric Data in Society and Science: A Review from the Baltic SeaAMBIO, 2011
- High-frequency multibeam echo-sounder measurements of seafloor backscatter in shallow water: Part 1 – Data acquisition and processingUnderwater Technology, 2011
- Mapping Submerged Landscapes Using Multibeam Bathymetric Data: a case study from the north coast of IrelandInternational Journal of Nautical Archaeology, 2011
- Using Multibeam Echo-Sounder Data to Identify Shipwreck Sites: archaeological assessment of the Joint Irish Bathymetric Survey dataInternational Journal of Nautical Archaeology, 2011
- Quantitative experimental comparison of single-beam, sidescan, and multibeam benthic habitat mapsICES Journal of Marine Science, 2010
- Seamount Characteristics and Mine-Site Model Applied to Exploration- and Mining-Lease-Block Selection for Cobalt-Rich Ferromanganese CrustsMarine Georesources & Geotechnology, 2009
- A Post-Processing Method for the Removal of Refraction Artifacts in Multibeam Bathymetry DataMarine Geodesy, 2007
- Seabed habitat mapping in the Kent Group of islands and its role in Marine protected area planningAquatic Conservation: Marine and Freshwater Ecosystems, 2004