Mitigation of cogging torque in transverse‐flux permanent‐magnet machines with flux concentrators by step skewing of stator pole
Open Access
- 2 September 2020
- journal article
- research article
- Published by Institution of Engineering and Technology (IET) in IET Electric Power Applications
- Vol. 14 (12) , 2378-2388
Abstract
The objective of this article is to study how the stator step skewing method can lead to the reduction of the cogging torque of a transverse‐flux permanent‐magnet (TFPM) machine with flux concentrators. Three structures are analysed and compared in terms of their influence of the skewed displacement on the cogging torque using the three‐dimensional finite element method (3D‐FEM). Thereafter, to validate the FEM results, cogging torque is calculated by applying a Schwarz–Christoffel (SC) conformal mapping. To apply this transformation, the 3D TFPM generator structure with axially magnetised permanent magnets (PMs) is converted into a 2D structure with radially magnetised PMs and the cogging torque of the machine is predicted using both the analytical method and 3D‐FEM. The accuracy of the approach is demonstrated by the adequate agreement between the results obtained through this SC mapping and those of the 3D‐FEM. In addition, two 100 W prototyped TFPM machines are designed, simulated, manufactured and tested to validate the effects of the step‐skewed stator yoke on the predicted cogging torque and back‐EMF.Keywords
This publication has 35 references indexed in Scilit:
- An Electromagnetic Field and Electric Circuit Coupled Method for Solid Conductors in 3-D Finite-Element MethodIEEE Transactions on Magnetics, 2015
- Investigation of Skewing Effects on the Vibration Reduction of Three-Phase Switched Reluctance MotorsIEEE Transactions on Magnetics, 2015
- A Thrust Force Analysis Method for Permanent Magnet Linear Motor Using Schwarz–Christoffel Mapping and Considering Slotting Effect, End Effect, and Magnet ShapeIEEE Transactions on Magnetics, 2015
- A new geometrical construction using rounded surfaces proposed for the transverse flux machine for direct drive wind turbine2014
- Material-Efficient Permanent-Magnet Shape for Torque Pulsation Minimization in SPM Motors for Automotive ApplicationsIEEE Transactions on Industrial Electronics, 2014
- Reducing the cogging torque of PM Transverse Flux Machines by discrete skewing of a segmented stator2012
- Analytical model describing the operation behaviour of transverse flux machines in flat magnet configuration2007
- Algorithm 843ACM Transactions on Mathematical Software, 2005
- Reduction of cogging force in PM linear motors by pole-shiftingIEE Proceedings - Electric Power Applications, 2005
- Development of a new transverse flux motor1997