Microstructural Characterization of Reactively Sintered Mullites
Authors:
- 1 February 2000
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 83 (2) , 369-376
Abstract
Mullite ceramics have been produced by reaction sintering of powders prepared using pseudoboehmite–colloidal silica and aluminum sulfate–colloidal silica mixtures. The microstructural development of these mullites was studied by a number of transmission electron microscopy based techniques including diffuse dark field, Fresnel fringe defocus imaging, and high‐resolution transmission electron microscopy. This characterization procedure showed that mullite ceramics free from glassy phases at triple junctions and grain boundaries could be produced from both mixtures using suitable sintering temperatures and alumina/silica ratios. The wetting of grain boundaries by glass, occurring in the mullite ceramics from either incomplete reaction between alumina and silica components or release of silica from the mullite structure with increasing temperature, was found to depend on the prior thermal history of the ceramics.Keywords
This publication has 25 references indexed in Scilit:
- Fresnel contrast analysis of composition changes and space charge at grain boundaries in mulliteUltramicroscopy, 1996
- Transmission Electron Microscopy and Electron Energy‐Loss Spectroscopy Characterization of Glass Phase in Sol‐Gel‐Derived MulliteJournal of the American Ceramic Society, 1996
- Sintering behaviour of precursor mullite powders and resultant microstructuresJournal of the European Ceramic Society, 1996
- Sintering of pre-mullite powder obtained by chemical processingJournal of Materials Science, 1993
- Microstructure, Microchemistry, and Flexural Strength of Mullite CeramicsJournal of the American Ceramic Society, 1991
- High‐Temperature Compressive Creep of Polycrystalline MulliteJournal of the American Ceramic Society, 1991
- Microstructure and Mechanical Properties of Mullite CeramicsJournal of the Ceramic Society of Japan, 1990
- Contrast effects at grooved interfacesUltramicroscopy, 1989
- Mechanical Properties of MulliteJournal of the American Ceramic Society, 1983
- High‐Temperature Mechanical Properties of Mullite Under CompressionJournal of the American Ceramic Society, 1977