Influence of advanced injection timing on the performance and emissions of CI engine fueled with ethanol-blended diesel fuel
Authors:
- 28 March 2008
- journal article
- research article
- Published by Hindawi Limited in International Journal of Energy Research
- Vol. 32 (11) , 1006-1015
Abstract
Ethanol has been considered as an alternative fuel for diesel engines. On the other hand, injection timing is a major parameter that sensitively affects the engine performance and emissions. Therefore, in this study, the influence of advanced injection timing on the engine performance and exhaust emissions of a single cylinder, naturally aspirated, four stroke, direct injection diesel engine has been experimentally investigated when using ethanol-blended diesel fuel from 0 to 15% with an increment of 5%. The original injection timing of the engine is 27° crank angle (CA) before top dead center (BTDC). The tests were conducted at three different injection timings (27, 30 and 33° CA BTDC) for 30 Nm constant load at 1800 rpm. The experimental results showed that brake-specific energy consumption (BSEC), brake-specific fuel consumption (BSFC), NOx and CO2 emissions increased as brake-thermal efficiency (BTE), smoke, CO and HC emissions decreased with increasing amount of ethanol in the fuel mixture. Comparing the results with those of original injection timing, NOx emissions increased and smoke, HC and CO emissions decreased for all test fuels at the advanced injection timings. For BSEC, BSFC and BTE, advanced injection timings gave negative results for all test conditions. Copyright © 2008 John Wiley & Sons, Ltd.Keywords
This publication has 14 references indexed in Scilit:
- The effects of injection timing on NOx emissions of a low heat rejection indirect diesel injection engineApplied Thermal Engineering, 2005
- An experimental study of the effect of octane number higher than engine requirement on the engine performance and emissionsApplied Thermal Engineering, 2005
- The influence of air–fuel ratio on engine performance and pollutant emission of an SI engine using ethanol–gasoline-blended fuelsAtmospheric Environment, 2004
- The addition of hydrogen to a gasoline-fuelled SI engineInternational Journal of Hydrogen Energy, 2004
- Effects of ethanol addition on performance and emissions of a turbocharged indirect injection Diesel engine running at different injection pressuresEnergy Conversion and Management, 2004
- The use of ethanol–gasoline blend as a fuel in an SI engineRenewable Energy, 2004
- Effect of injection timing on the performance of a dual fuel engineEnergy Conversion and Management, 2002
- Effect of advanced injection timing on the performance of rapeseed oil in diesel enginesRenewable Energy, 2000
- Effect of advanced injection timing on the performance of natural gas in diesel enginesSādhanā, 2000
- Performance of a stationary diesel engine using vapourized ethanol as supplementary fuelBiomass and Bioenergy, 1998