Effect of Compatibilizers on Impact Strength in Polycarbonate‐Rich Blends With Acrylonitrile–Butadiene–Styrene
Authors:
- Rujun DaiRDRujun Dai
- Yansheng ZuoYZYansheng Zuo
- Lu XuLXLu Xu
- Songsong LiSLSongsong Li
Open Access
- 1 January 2025
- journal article
- Published by Wiley in Advances in Polymer Technology
- Vol. 2025 (1)
Abstract
Polycarbonate (PC)/acrylonitrile–butadiene–styrene (ABS) blends with no compatibilizers have been manufactured commercially and widely used for many applications for many years. Although most studies have shown that compatibilizers can improve the product performance of PC/ABS alloys, there are still different scholars who have demonstrated that compatibilizers do not have the expected effect. This study investigated the effects of various types of compatibilizers on properties such as the impact strength of PC/ABS alloys. To make rubber particles better mixed and achieve fine dispersion, a closed torque rheometer was used to make PC/ABS alloys. To avoid the influence of flow orientation on rubber particle dispersion during injection molding, test specimens were prepared using the mold pressing method. PC‐rich alloys with no compatibilizer show the best performance in all trial samples. Maleic anhydride grafted ABS (ABS‐g‐MAH), synthesized by emulsion polymerization, could not enhance properties significantly as a compatibilizer. Methyl methacrylate–butadiene–styrene (MBS), which has the same rubber content as ABS powder, could not improve performance either. Sufficient rubbers well‐dispersed in styrene/acrylonitrile (SAN) and PC content are key factors in influencing the performance in PC‐rich blends.Keywords
This publication has 40 references indexed in Scilit:
- Relationship between the interfacial tension and compatibility of polycarbonate and poly(acrylonitrile–butadiene–styrene) blends with reactive compatibilizersJournal of Applied Polymer Science, 2018
- Improvement of impact strength and hydrolytic stability of PC/ABS blend using reactive polymerJournal of Applied Polymer Science, 2016
- Phase morphology and interfacial characteristics of polycarbonate/acrylonitrile‐ethylene‐propylene‐diene‐styrene blends compatibilized by styrene‐maleic anhydride copolymersJournal of Applied Polymer Science, 2015
- Effects of ABS‐g‐MAH on mechanical properties and compatibility of ABS/PC alloyJournal of Applied Polymer Science, 2001
- Effect of functionality levels and compatibility of polycarbonate blends with maleic anhydride grafted ABSJournal of Applied Polymer Science, 1999
- Compatibility enhancement of ABS/polycarbonate blendsJournal of Applied Polymer Science, 1998
- Mechanical properties of blends of polycarbonate with unmodified and maleic anhydride grafted ABSPolymer International, 1998
- Polycarbonate/ABS blends: A literature reviewAdvances in Polymer Technology, 1994
- Effect of melt annealing on the morphology and properties of polycarbonate blendsJournal of Applied Polymer Science, 1992
- Polycarbonate blends with styrene/acrylonitrile copolymersJournal of Applied Polymer Science, 1984