Overview of Sheet Metals for Stamping
Author:
- James R. FeketeJFJames R. Fekete
- 24 February 1997
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
Continuing pressure to meet fuel economy and safety requirements, improve quality and minimize cost has resulted in new challenges for auto industry engineers. New sheet metals for auto body stampings have helped the transportation industry meet these challenges. The steel industry has developed a number of new products for these purposes, including dent resistant steels for outer body panels, high strength steels for structural applications and interstitial free (IF) steels for difficult forming challenges. The aluminum industry is also aggressively pursuing new applications. New aluminum products have been applied to closure panels, resulting in significant mass reductions in several high volume vehicles. Stamped aluminum for structures have also been developed and commercialized, albeit for lower volume production. This paper will discuss these new materials and the benefits and challenges they present.Keywords
This publication has 20 references indexed in Scilit:
- Cold-rolled, high-strength sheet steels for auto applicationsJOM, 1996
- Effect of Boron on the Resistance to Secondary Working Embrittlement in Extra-low-C Cold-rolled Steel Sheet.ISIJ International, 1994
- Factors influencing planar anisotropy of batch-annealed cold stripSteel Research, 1993
- On the mechanism of bake-hardeningSteel Research, 1993
- Emerging technologies in the hot-dip coating of automotive sheet steelJOM, 1993
- Advanced sheet steels for automotive applicationsJOM, 1992
- Strengthening of grain boundaries by segregated interstitials in ironMaterials Science and Technology, 1990
- Strengthening of grain boundaries by segregated interstitials in ironMaterials Science and Technology, 1990
- SHAPESET: A process to reduce sidewall curl springback in high-strength steel railsJournal of Applied Metalworking, 1984
- Dent Resistance of Cold-Rolled Low-Carbon Steel SheetSAE International Journal of Advances and Current Practices in Mobility, 1973