Ultrasonic velocity measurements during phase transformations in steels using laser ultrasonics
Authors:
- 1 June 2001
- journal article
- conference paper
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 89 (11) , 6487-6495
Abstract
This article presents accurate laser-ultrasonic measurements of longitudinal velocity in the 500–1000 °C temperature range in carbon steel samples for different conditions known to affect phase transformations such as cooling rate, carbon concentration, and rolling. Measurements were performed during continuous heating and cooling at rates varying between 0.1 and 20 °C/s. Carbon concentrations ranged from 0.0% to 0.72%. Hot-rolled and cold-rolled samples were measured. For the hot-rolled samples, a reproducible hysteresis was observed in the dependence of the ultrasonic velocity versus temperature of samples having a significant carbon concentration. This hysteresis is attributed to the combined effects of the phase transformation and of the ferromagnetic–paramagnetic transition. In particular, the rate of change of velocity with temperature during heating suddenly diminishes at the Curie temperature, and the velocity behavior during cooling shows clearly the start and end of phase transformations, even allowing discrimination between ferrite and pearlite nucleations. For the cold-rolled samples, significant drops in ultrasonic velocity were observed at the transformation temperatures when the samples were heated for the first time. However, the magnitude of these drops decreased for subsequent heating. These drops are attributed to irreversible crystallographic orientation changes caused by phase transformations. This effect was modeled using the Kurdjumov–Sach transformation relationship. The model calculation agrees well with the experimental data.Keywords
This publication has 19 references indexed in Scilit:
- A new technique for the quantitative real-time monitoring of austenite grain growth in steelScripta Materialia, 2000
- Laser-ultrasonic monitoring of phase transformations in steelsScripta Materialia, 1998
- Transformation Textures in Steels.ISIJ International, 1994
- Non-contact ultrasonic measurements on steel at elevated temperaturesNDT & E International, 1993
- Emat Application at High TemperatureNondestructive Testing and Evaluation, 1992
- Ultrasonic monitoring of texture in cold-rolled steel sheetsThe Journal of the Acoustical Society of America, 1988
- Texture of polycrystalline metals characterized by ultrasonic velocity measurementsThe Journal of the Acoustical Society of America, 1987
- Ultrasonic measurement of internal temperature distributionPhilosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences, 1986
- Ultrasonic Attenuation and Velocity in Hot Specimens by the Momentary Contact Method with Pressure Coupling, and Some Results on Steel to 1200°CThe Journal of the Acoustical Society of America, 1972
- Ultrasonic Buffer-Rod Technique for the High-Temperature Measurement of the Elastic Moduli of Short SpecimensThe Journal of the Acoustical Society of America, 1968