Development of an Automatic Mold Polishing System
Authors:
- 3 October 2005
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automation Science and Engineering
- Vol. 2 (4) , 393-397
Abstract
In this study, an automatic mold polishing system (AMPS) has been successfully developed. The AMPS integrates with mold geometry process kernel, path planner, process planner, and force control robot into a system. The polishing path is generated and drawn on the three-dimensional mold surface for verification. The AMPS can also automatic process the task planning according to the polishing requirements of the mold. The task list includes all the procedures and optimal polishing parameters. The polishing tasks were then executed by a force controllable robot. The experiment shows that the resultant of surface roughness satisfies the expectation in the process planning. Note to Practitioners -In the manufacturing of molds, the most time-consuming process is on the final stage the polishing process. The polishing processes in the mold industry are almost conducted manually. The worker needs exceptional skill that can only be trained by experienced master. For mass production of molds, automatic polishing of the mold is a necessary. From the long-term research effort, we have constructed an automatic mold polishing system (AMPS). The AMPS includes a dedicated 5-axes robot to execute the polishing task; a force control mechanism to hold the tool and apply constant pressure on the mold surface; and a software system that can read the geometry of the mold surface and automatically generate the detail polishing process and the polishing path for the robot. The AMPS now can handle polishing process for planar surfaces with obstacle inside and surfaces of revolution. Research effort is now concentrated on dealing with the free-from surfaces. Besides, reading the Initial Graphics Exchange System (IGES) format from various computer-aided design systems is another important issue for the system to be more useful. In all, the AMPS is just begin to accumulate any further researches and developments that may sustain various requirements of polishing applications.Keywords
This publication has 12 references indexed in Scilit:
- High precision polishing robot using a learning-based surface following controller2004
- New finishing system for metallic molds using a hybrid motion/force control2004
- Robotic Path Planning for an Automatic Mold Polishing SystemInternational Journal of Robotics and Automation, 2004
- Polishing robot using a joystick controlled teaching system2002
- Analysis of Lapping and Polishing of a Gauge BlockThe International Journal of Advanced Manufacturing Technology, 2002
- Development of a sensor information integrated expert system for optimizing die polishingRobotics and Computer-Integrated Manufacturing, 2001
- A robust trajectory tracking control of a polishing robot system based on CAM dataRobotics and Computer-Integrated Manufacturing, 2001
- Robotic polishing of free-form surfaces using scanning pathsJournal of Materials Processing Technology, 1999
- Finishing of dies and moulds An approach to quality‐orientated automation with the help of industrial robotsIndustrial Robot: the international journal of robotics research and application, 1994
- Automation of the Surface Finishing in the Manufacturing of Dies and MoldsCIRP Annals, 1990